Part Number List

Results 3
Models table for series Small / Slim Object Detection Area Sensor NA1-11
Part No.DatasheetCE Marking Directive ComplianceSensing heightSensing rangeElement pitchNumber of emitting / receiving elementsSensing objectSupply voltageCurrent consumptionOutputOutput:Utilization categoryOutput:Output operationOutput:Short-circuit protectionResponse timeIndicators:EmitterIndicators:ReceiverPollution degreeProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage withstandabilityInsulation resistanceVibration resistanceShock resistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)
EMC Directive, RoHS Directive
100 mm 3.937 in
0.17 to 1 m 0.558 to 3.281 ft
(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.)
10 mm 0.394 in
11 Nos. each on the emitter and the receiver, respectively
ø13.5 mm ø0.531 in or more opaque object
(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 80 mA or less
Receiver: 100 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when beam channel is interrupted, selectable by operation mode switch
Incorporated
In Dark state: 5 ms or less
In Light state: 10 ms or less
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch)
Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch)
3 (Industrial environment)
IP62 (IEC)
-10 to 55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system)
Enclosure: Heat-resistant ABS
Lens: Acrylic
Indicator cover: Acrylic
0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.
Net weight: Emitter 80 g approx., Receiver 85 g approx
Gross Weight: 210 g approx.
EMC Directive, RoHS Directive
100 mm 3.937 in
0.17 to 1 m 0.558 to 3.281 ft
(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.)
10 mm 0.394 in
11 Nos. each on the emitter and the receiver, respectively
ø13.5 mm ø0.531 in or more opaque object
(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 80 mA or less
Receiver: 100 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when beam channel is interrupted, selectable by operation mode switch
Incorporated
In Dark state: 5 ms or less
In Light state: 10 ms or less
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch)
Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch)
3 (Industrial environment)
IP62 (IEC)
-10 to 55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system)
Enclosure: Heat-resistant ABS
Lens: Acrylic
Indicator cover: Acrylic
0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.
Net weight: Emitter 80 g approx., Receiver 85 g approx
Gross Weight: 210 g approx.
EMC Directive, RoHS Directive
100 mm 3.937 in
0.17 to 1 m 0.558 to 3.281 ft
(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.)
10 mm 0.394 in
11 Nos. each on the emitter and the receiver, respectively
ø13.5 mm ø0.531 in or more opaque object
(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 80 mA or less
Receiver: 100 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when beam channel is interrupted, selectable by operation mode switch
Incorporated
In Dark state: 5 ms or less
In Light state: 10 ms or less
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch)
Operation indicator: Orange LED (lights up when the output is ON)
Power indicator: Green LED (lights up when the power is ON)
Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch)
3 (Industrial environment)
IP62 (IEC)
-10 to 55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system)
Enclosure: Heat-resistant ABS
Lens: Acrylic
Indicator cover: Acrylic
0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 5 m 16.404 ft long
Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable.