Part Number List

Results 6
Models table for series Compact Size Picking Sensor NA1-PK3
Part No.DatasheetCE Marking Directive ComplianceSensing heightSensing rangeBeam PitchNumber of beam channelsSensing objectSupply voltageCurrent consumptionOutputOutput:Utilization categoryOutput:Output operationOutput:Short-circuit protectionResponse timeIndicators:EmitterIndicators:ReceiverInterference prevention functionPollution degreeProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage withstandabilityInsulation resistanceVibration resistanceShock resistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
Emitter: 50 g approx.
Receiver: 50 g approx.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
Emitter: 50 g approx.
Receiver: 50 g approx.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.