Part Number List

Results 12
Models table for series Convergent Reflective Micro Photoelectric Sensor PM2
Part No.DatasheetCE Marking DirectivesSensing rangeMinimum sensing objectHysteresisRepeatability(perpendicular to sensing axis)Supply voltageCurrent consumptionOutputOutput:Overcurrent protectionOutput:Utilization categoryResponse timeOperation indicatorPollution degreeAmbient TemperatureAmbient HumidityAmbient IlluminanceVibration resistanceShock resistanceEmitting ElementMaterialCableCable LengthWeight (Typ.)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Fixed cable part: PBT
0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long
(Note) Cable cannot be extended.
-
Net weight: 25 g approx.
Gross weight: 330 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
-
Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
-
Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
-
Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Fixed cable part: PBT
0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long
(Note) Cable cannot be extended.
-
Net weight: 25 g approx.
Gross weight: 330 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
-
Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Net weight: 4 g approx.
Gross weight: 80 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)
-
Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
Net weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Fixed cable part: PBT
0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long
(Note) Cable cannot be extended.
-
Net weight: 25 g approx.
Gross weight: 330 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Fixed cable part: PBT
0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long
(Note) Cable cannot be extended.
-
Net weight: 25 g approx.
Gross weight: 330 g approx.(10 piece package)
EMC Directive, RoHS Directive
2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Average: 25 mA or less, Peak: 80 mA or less
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Incorporated
DC-12 or DC-13
0.8 ms or less
Red LED (lights up when the output is ON)
3 (Industrial environment)
–10 to +55 ℃ +14 to +131 (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 3,500 lx or less at the light-receiving face
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polycarbonate, Fixed cable part: PBT
0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long
(Note) Cable cannot be extended.
-
Net weight: 25 g approx.
Gross weight: 330 g approx.(10 piece package)