Photoelectric Sensors / Laser Sensors: Leak Detection Sensor EX-F70/EX-F60

Model List

Found 22 matches. Display 16 - 22 matches.
Part No.sort descendingData SheetSensing objectSupply voltageCurrent consumptionOutputOutput:Output operationOutput:Short-circuit protectionResponse timeParts Inventory
   Column active Filter
Close

Filter by Sensing object

Column active Filter
Close

Filter by Supply voltage

Column active Filter
Close

Filter by Current consumption

Column active Filter
Close

Filter by Output

Column active Filter
Close

Filter by Output:Output operation

Column active Filter
Close

Filter by Output:Short-circuit protection

Column active Filter
Close

Filter by Response time

 
design engineersPanasonicMS-EX-F7-3
n/an/an/an/an/an/an/a
design engineersPanasonicEX-F61-PN-C5
Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.
Note : Highly viscous liquid may not be detected stably.
Note : The agents mentioned above are examples. For details, please contact our office.
Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less15 mA or lessPNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less
design engineersPanasonicEX-F62
Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.
Note : Highly viscous liquid may not be detected stably.
Note : The agents mentioned above are examples. For details, please contact our office.
Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less15 mA or lessNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less
design engineersPanasonicEX-F71-PN
Water, Fluorinert™
Note:Highly viscous liquid may not be detected stably.
Note:Fluorinert is the world wide trademark of 3M.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less10 mA or less(PNP output type: 15 mA or less)PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less
design engineersPanasonicEX-F71-PN-C5
Water, Fluorinert™
Note:Highly viscous liquid may not be detected stably.
Note:Fluorinert is the world wide trademark of 3M.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less10 mA or less(PNP output type: 15 mA or less)PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less
design engineersPanasonicEX-F72-PN
Water, Fluorinert™
Note:Highly viscous liquid may not be detected stably.
Note:Fluorinert is the world wide trademark of 3M.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less10 mA or less(PNP output type: 15 mA or less)PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less
design engineersPanasonicEX-F61
Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.
Note : Highly viscous liquid may not be detected stably.
Note : The agents mentioned above are examples. For details, please contact our office.
Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
12 to 24 V DC ± 10 % Ripple P-P 10 % or less15 mA or lessNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFFIncorporated50 ms or less

Pages