Digital Fiber Sensor FX-550

The FX-550 Digital Fiber Sensor or Fiber Optic Amplifier has three times higher emission power and 1.6 times longer sensing range than conventional models. Higher incident light intensity results in more stable detection and easy beam axis adjustment.

Part Number List

Results 4
Models table for series Digital Fiber Sensor FX-550
Part No.DatasheetCE Marking Directive ComplianceSupply Voltage Power ConsumptionOutputOutput: Output Operation Output: Short-Circuit ProtectionResponse TimeSensitivity SettingIncident Light Sensitivity SettingIncident Light Intensity Display RangeTimer Function Timer Function: Timer PeriodDifferent Frequency Interference Prevention FunctionProtectionAmbient TemperatureEmitting Element (Modulated)MaterialCableCable ExtensionWeight (Typ.)RemarkDirective Compliance Vibration ResistanceShock Resistance
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)

NPN open-collector transistor
・Maximum sink current : 100 mA
・Applied voltage : 30 V DC or less (between output and 0 V)
・Residual voltage : 2 V or less (Note) (at maximum sink current)
(Note): In case of using the quick-connection cable (cable length 5 m 16.404 ft)(optional).
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
-
-
Net weight : 15 g approx., Gross weight : 55 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)

PNP open-collector transistor
・Maximum source current : 100 mA
・Applied voltage : 30 V DC or less (between output and +V)
・Residual voltage : 2 V or less (at maximum source current)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Net weight : 55 g approx., Gross weight : 90 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)

NPN open-collector transistor
・Maximum sink current : 100 mA
・Applied voltage : 30 V DC or less (between output and 0 V)
・Residual voltage : 2 V or less (at maximum sink current)
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)
Net weight : 55 g approx., Gross weight : 90 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
EMC Directive, RoHS Directive
12 to 24 V DC +10-15 % Ripple P-P 10 % or less
Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)

PNP open-collector transistor
・Maximum source current : 100 mA
・Applied voltage : 30 V DC or less (between output and +V)
・Residual voltage : 2 V or less (Note) (at maximum source current)
(Note): In case of using the quick-connection cable (cable length 5 m 16.404 ft)(optional).
Switchable either Light-ON or Dark-ON by L/D mode
Incorporated
FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable
2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incorporated, 4 steps
FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999
Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective
Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,
Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.
(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.
Incorporated (up to 4 units). Note that the response time varies depending on the setting.
F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less
(Note): This function increases the hysteresis. Check the sensing condition when using the function.
IP40(IEC)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units
are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉
Red LED (Peak emission wavelength : 660 nm 0.026 mil)
Enclosure, Case cover : Polycarbonate, Switch : Polyacetal
-
-
Net weight : 15 g approx., Gross weight : 55 g approx.
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
EMC Directive, RoHS Directive
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each