Specifications
Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Applicable Fibers | FD-L51, FD-L52, FD-L53, FD-L54 |
Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current Consumption | 45 mA or less |
Sensing Object | Opaque or translucent object larger than the spot diameter of the applicable fiber (Note) Make sure to confirm detection with an actual sensor before use. |
Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
Output: Utilization Category | DC-12 or DC-13 |
Output: Output Operation | Switchable either Coincident-ON or Incoincident-ON |
Output: Short-Circuit Protection | Incorporated |
Response Time | 1 ms or less (3 ms or less when auto-teaching has been engaged) |
Indicator | Power indicator: Green LED (lights up when the power is ON, blinks during auto-teaching) Operation indicator: Red LED (lights up when the output is ON) * Both blink alternately when a manual teaching error occurs Both blink simultaneously when the output is short-circuited |
Timer Function | Approx. 40 ms fixed OFF-delay timer (switchable either effective or ineffective) |
Teaching | Button operation, Switchable either manual-teaching or auto-teaching |
Resistance Tolerance | Adjustable in 16 grades with the tolerance adjuster |
Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) , Storage: -20 to +70 ℃ -4 to +158 ℉ (Note) The amplifier should be used under the ambient temperature of +15 to +35 ℃ +59 to +95 ℉ when the tolerance adjuster is set from the 1st grade to the 4th grade, which provide fine color resolution. |
Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient Illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock Resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
Emitting Element | Red LED / Green LED / Blue LED (Peak emission wavelength: 644 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil, modulated) |
Material | Enclosure: ABS Case cover: Polycarbonate Fiber lock lever: PPS |
Cable | 0.2 mm2 3-core cabtyre cable, 2 m 328.084 ft long |
Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
Weight (Typ.) | Net weight: 85 g approx. |
Accessory | MS-DIN-3 (Amplifier mounting bracket): 1 pc. Adjusting screwdriver: 1 pc. |