Rectangular-shaped Inductive Proximity Sensor GX-F/H

The GX-F/H Rectangular-Shaped Inductive Proximity Sensor has a very long and stable sensing range among comparable rectangular inductive Proximity Sensors and is easy to install. Precise adjustment and control of sensing sensitivity greatly reduces individual Sensor differences and variations.

The Rectangular GX-F/H Sensor is designed to provide excellent temperature characteristics. Stable sensing can be obtained regardless of the time of day or season.

Characteristics

  • Built-in Amplifier
  • Mutual Interference Prevention
  • Oil And Water Resistant
  • Easy To See Indicators

I/O CIRCUIT DIAGRAMS

16

Part Number List

Results 208
Models table for series Rectangular-shaped Inductive Proximity Sensor GX-F/H
Part No.DatasheetMax. Operation DistanceStable Sensing RangeStandard Sensing Object HysteresisRepeatabilitySupply Voltage Current ConsumptionOutputOutput: Output Operation Output: Utilization Category Max. Response FrequencyOperation Indicator ProtectionAmbient TemperatureAmbient HumidityVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceSensing Range Variation: Temperature Characteristics Sensing Range Variation: Voltage Characteristics MaterialCableCable ExtensionNet Weight CE Marking Directive Compliance
4.0 mm 0.158 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 3.3 mm 0 to 0.130 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally closed
DC-12 or DC-13
500 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
4.0 mm 0.158 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 3.3 mm 0 to 0.130 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally closed
DC-12 or DC-13
500 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
4.0 mm 0.158 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 3.3 mm 0 to 0.130 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally open
DC-12 or DC-13
500 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally closed
DC-12 or DC-13
250 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)
Normally closed
DC-12 or DC-13
250 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
4.0 mm 0.158 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 3.3 mm 0 to 0.130 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally closed
DC-12 or DC-13
500 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less(between output and +V)
- Residual voltage: 2 V or less (at 100 mA source current)
Normally open
DC-12 or DC-13
250 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)
Normally open
DC-12 or DC-13
250 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive
1.6 mm 0.063 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 1.3 mm 0 to 0.051 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 12 × 12 × t 1 mm 0.472 × 0.472 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)
Normally open
DC-12 or DC-13
400 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
15 g approx.
EMC Directive, RoHS Directive
5 mm 0.197 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
0 to 4.2 mm 0 to 0.165 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Iron sheet 20 × 20 × t 1 mm 0.787 × 0.787 × t 0.039 in
20 % or less of operation distance(with standard sensing object)
Along sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
15 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)
Normally open
DC-12 or DC-13
250 Hz
Orange LED(lights up when the output is ON)
IP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
45 to 85 % RH, Storage: 35 to 95 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit .
Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
Enclosure: PBT
Indicator part: Polyester
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
20 g approx.
EMC Directive, RoHS Directive