Specification

Specifications table for model HG-C1100
ItemPerformance characteristics
Applicable StandardEMC Directive Compliance, FDA Standard
Measurement Center Distance 100mm 3.937 in
Measuring Range±35mm 1.328 in
Repeatability70 μm 2.756 mil
Linearity±0.1%F.S.
Temperature Characteristics 0.03% F.S. /℃
Light SourceRed semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note)
Max. output: 1mW
emission peak wavelength: 655nm 0.026 mil
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
Beam Diameterø120 μm 4.7241 mil approx.
(Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value.
Supply Voltage 12 to 24V DCplus or minus 10% Ripple P-P 10%
Current Consumption40 mA or less (at 24V DC supply voltage)
65 mA or less (at 12V DC supply voltage)
Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 : 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage)
Control OutputNPN open-collector transistor
- Maximum sink current: 50mA
- Applied voltage: 30V DC or less (Between control output to 0V)
- Residual voltage: 1.5V or less (At 50mA sink current)
- Leakage current: 0.1 mA or less
Control Output: Output OperationEither Light-ON or Dark-ON
Control Output: Short-Circuit ProtectionIncorporated (Auto reset type)
Analogue Output: Analog Voltage Output• Output range: 0 to 5 V (at alarm: +5.2 V)
• Output impedance: 100Ω
Analogue Output: Analog Current Output• Output range: 4 to 20mA (at alarm: 0mA)
• Output impedance: 300Ω or less
Note : Analog current output has been added from shipment in August 2016.
Response TimeSwitchable between 1.5 ms / 5 ms / 10 ms
External InputNPN non-contact input
- Input conditions
Invalid: +8 to +V DC or Open
Valid: 0 to +1.2V DC
- Input impedance: 10kΩ approx.
Pollution Degree 2
Operating Altitude2,000 m 6561.680 ft or less
ProtectionIP67 (IEC)
Ambient Temperature-10 to +45 ℃ -14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
Ambient Humidity35 to 85% RH, Storage: 35 to 85% RH
Ambient IlluminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
Vibration Resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Cable5-core composite cable, 2 m 6.5617 ft long
Cable ExtensionExtension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable.
MaterialEnclosure: Aluminum die-cast
Front cover: Acrylic
Weight (Typ.)Net weight: 35 g approx. (without cable), 85 g approx. (including cable)
Regulatory Compliance and CertificationCE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification
(Note) : The UL/c-UL certified products have been shipped since April, 2017.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.