Ultra-slim Photoelectric Sensor EX-10

With dimensions of only 14.5 x 3.5 x 10mm, the EX-10 Series Ultra-Slim Photoelectric Sensors are among the smallest and narrowest Sensors worldwide. Despite their ultra miniaturized design, the maximum range of the Thru-Beam version is 1000mm yielding an exceptionally high performance.

The EX-10 Series is available in two different basic designs, with a front sensing or side sensing light source, which additionally extends the mounting options in narrow spaces.

Characteristics

  • Response Time Only 0.5ms
  • Front Sensing Or Side Sensing Versions
  • New: Up To 35% Less Power Consumption
  • New: Improved Ambient Light Immunity
  • Fixed Focus Reflecting Types (Diffuse Light Type) Available
  • 2 Indicator LEDs
  • IP67 enclosure rating

Part Number List

Results 64
Models table for series Ultra-slim Photoelectric Sensor EX-10
Part No.DatasheetCE Marking Directive ComplianceSensing Range Min. Sensing ObjectHysteresisRepeatability (Perpendicular to Sensing Axis) Supply Voltage Current ConsumptionOutputOutput: Utilization Category Output: Short-Circuit ProtectionResponse TimeOperation Indicator Incident Beam IndicatorStability IndicatorPollution Degree ProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)AccessoryCertification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
150 mm 5.906 in
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long (Note:The bending-resistant cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.)
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Mounting screws: 1 set
UL certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
500 mm 19.685 in
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Mounting screws: 1 set
UL certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
500 mm 19.685 in
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Mounting screws: 1 set
UL certification, Korea’s S-mark certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
500 mm 19.685 in
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Mounting screws: 1 set
UL certification, Korea’s S-mark certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
2 to 25 mm 0.079 to 0.984 in (Conv. point: 10 mm 0.394 in)
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object.
ø0.1 mm ø0.004 in copper wire (Completely beam interrupted object) (Setting distance: 10 mm 0.394 in)
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object.
0.1 mm 0.004 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight: 20 g approx
Gross weight: 40 g approx
Mounting screws: 1 set
UL certification, Korea’s S-mark certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
150 mm 5.906 in
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Mounting screws: 1 set
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
500 mm 19.685 in
ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Mounting screws: 1 set
RoHS Directive
150 mm 5.906 in
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
25 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less(at 100 mA sink current),1 V or less (at 16 mA sink current)
-
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON), located on the bifurcation
Red LED (lights up under light received condition), located on the receiver
Green LED (lights up under stable light received condition or stable dark condition), located on the receiver
-
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Bifurcation: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328 ft is possible with 0.3 mm2, or more, cable.
Net weight: 55 g approx
Gross weight: 80 g approx
Mounting screws: 1 set
Adjusting screwdriver: 1 pc
UL certification, Korea’s S-mark certification
RoHS Directive
150 mm 5.906 in
ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
25 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less(at 100 mA sink current),1 V or less (at 16 mA sink current)
-
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON), located on the bifurcation
Red LED (lights up under light received condition), located on the receiver
Green LED (lights up under stable light received condition or stable dark condition), located on the receiver
-
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
Bifurcation: Polyalylate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328 ft is possible with 0.3 mm2, or more, cable.
Net weight: 55 g approx
Gross weight: 80 g approx
Mounting screws: 1 set
Adjusting screwdriver: 1 pc
UL certification, Korea’s S-mark certification
・EMC Directive : EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
2 to 25 mm 0.079 to 0.984 in (Conv. point: 10 mm 0.394 in)
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object.
ø0.1 mm ø0.004 in copper wire (Completely beam interrupted object) (Setting distance: 10 mm 0.394 in)
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object.
0.1 mm 0.004 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
DC-12 or DC-13
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
-
Green LED (lights up under stable light received condition or stable dark condition)
3 (Industrial environment)
IP67 (IEC)
-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: Polyethylene terephthalate
Lens: Polyalylate
0.1 mm2 3-core (emitter: 2-core) flexible cabtyre cable, 2 m 6.562 ft long (Note:The bending-resistant cable type (model Nos. having suffix "-R") has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.)
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
Net weight: 20 g approx
Gross weight: 40 g approx
Mounting screws: 1 set
UL certification