Threaded Miniature Photoelectric Sensor EX-30 Ver.2

With an M4 Thru-Beam Type and an M6 Reflective Type Sensor, the user has a series of Miniature Photoelectric Sensors at their disposal from Panasonic. In addition to being quick and easy to install, the EX-30 Series Sensors' integrated signal amplifier, stable mechanical properties, and robust, zinc housing make them attractive alternatives to Photoelectric Sensors with fiber cables.

Characteristics:

  • Threaded Design (M4 Thru-Beam Type And M6 Reflective Type)
  • Response Time Only 0.5ms
  • New: Up to 35% Less Power Consumption
  • New: Improved Ambient Light Immunity
  • Red LED
  • Sensitivity Can Be Adjusted (EX-32, EX-33)
  • 2-Color LED Indicator
  • IP67 Degree Of Protection
  • Light ON/Dark ON Modes (EX-33)

Part Number List

Results 14
Models table for series Threaded Miniature Photoelectric Sensor EX-30 Ver.2
Part No.DatasheetCE Marking Directive ComplianceSensing Range Sensing Object HysteresisRepeatability (Perpendicular to Sensing Axis) Supply Voltage Current ConsumptionOutputOutput: Utilization Category Output: Output Operation Output: Short-Circuit ProtectionResponse TimeOperation Indicator Stability IndicatorSensitivity AdjusterPollution Degree ProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)Accessory
EMC Directive, RoHS Directive
500 mm 19.685 in
dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
DC-12 or DC-13
Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Nut: 2 pcs
Toothed lock washer: 2 pcs
EMC Directive, RoHS Directive
500 mm 19.685 in
dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Nut: 2 pcs
Toothed lock washer: 2 pcs
EMC Directive, RoHS Directive
500 mm 19.685 in
dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Nut: 2 pcs
Toothed lock washer: 2 pcs
EMC Directive, RoHS Directive
800 mm 31.496 in
dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Switchable either
Light-ON or Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Nut: 2 pcs
Toothed lock washer: 2 pcs
EMC Directive, RoHS Directive
50 mm 1.969 in
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
0.5 mm 0.020 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
DC-12 or DC-13
Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition orstable dark condition)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Acrylic
Enclosure cover: Polycarbonate
0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Net weight: 20 g approx
Gross weight: 30 g approx
Nut: 1 pc
Toothed lock washer: 1 pc
EMC Directive, RoHS Directive
50 mm 1.969 in
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
0.5 mm 0.020 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition orstable dark condition)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Acrylic
Enclosure cover: Polycarbonate
0.1 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Nut: 1 pc
Toothed lock washer: 1 pc
EMC Directive, RoHS Directive
50 mm 1.969 in
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
0.5 mm 0.020 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition orstable dark condition)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Acrylic
Enclosure cover: Polycarbonate
0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Net weight: 20 g approx
Gross weight: 30 g approx
Nut: 1 pc
Toothed lock washer: 1 pc
EMC Directive, RoHS Directive
50 mm 1.969 in
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
0.5 mm 0.020 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition orstable dark condition)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Acrylic
Enclosure cover: Polycarbonate
0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Net weight: 20 g approx
Gross weight: 30 g approx
Nut: 1 pc
Toothed lock washer: 1 pc
EMC Directive, RoHS Directive
500 mm 19.685 in
dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects)
-
0.05 mm 0.002 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current)
DC-12 or DC-13
Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
(incorporated on the receiver)
Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver)
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Polycarbonate
Enclosure cover: Polycarbonate
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Net weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
Nut: 2 pcs
Toothed lock washer: 2 pcs
EMC Directive, RoHS Directive
50 mm 1.969 in
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
Opaque, translucent or transparent object
(Note) Make sure to confirm detection with an actual sensor before use.
15 % or less of operation distance
(Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.
0.5 mm 0.020 in or less
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
13 mA or less
NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
DC-12 or DC-13
Dark-ON
Incorporated
0.5 ms or less
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition orstable dark condition)
Continuously variable adjuster
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (modulated)
Enclosure: Die-cast zinc (Nickel plated)
Lens: Acrylic
Enclosure cover: Polycarbonate
0.1 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Nut: 1 pc
Toothed lock washer: 1 pc