Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Sensing Range | 50 to 200 mm 1.969 to 7.874 in with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
Hysteresis | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) |
Repeatability | Along sensing axis: 1 mm 0.039 in or less Perpendicular to sensing axis: 0.5 mm 0.020 in or less |
Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current Consumption | 40 mA or less |
Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
Output: Utilization Category | DC-12 or DC-13 |
Output: Output Operation | Switchable either Light-ON or Dark-ON |
Output: Short-Circuit Protection | Incorporated |
Response Time | 1 ms or less |
Operation Indicator | Red LED (lights up when the output is ON) |
Stability Indicator | Green LED (lights up under stable light received condition or stable dark condition) |
Distance Adjuster | 2-turn mechanical adjuster |
Protection | IP67 (IEC) |
Pollution Degree | 3 (Industrial environment) |
Ambient Temperature | -25 to 60 degrees -13 to 140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to 70 degrees -22 to 158 degrees Fahrenheit |
Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient Illuminance | Incandescent light: 3,500 lx or less at the light-receiving face |
EMC | EN 60947-5-2 |
Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration Resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
Emitting Element | Infrared LED (peak emission wavelength: 880 nm 0.035mil, modulated) |
Material | Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Polycarbonate |
Cable | 0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 3 m 9.843 ft long |
Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
Weight (Typ.) | Net weight: 85 g approx. |
Accessory | MS-RX-1 (Sensor mounting bracket): 1 set Adjusting screwdriver: 1 pc |