EX-F1
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Sensing Object | Liquid (Note):Unclear or highly viscous liquid may not be detected stably. |
| Applicable Pipe Diameter | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note：Do not use the sensor with pipes other than the above specified.) |
| Supply Voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current Consumption | 30 mA or less (Note：Unclear or highly viscous liquid may not be detected stably.) |
| Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output: Output Operation | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 2 ms or less |
| Operation Indicator | Red LED (lights up when the output is ON) |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note：Liquid being detected should also be kept within the rated ambient temperature range.) |
| Ambient Illuminance | lncandescent light: 3,000 lx or less at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting Element | Infrared LED (modulated) |
| Material | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| Cable | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
| Cable Extension | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Weight (Typ.) | Net weight: 15 g approx., Gross weight: 60 g approx. |
| Accessory | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |