With the DP-0 Series, Panasonic launches a new digital Pressure Sensor which focuses on very simple operation. This Pressure Sensor has been developed especially for the electrical and electronic, semiconductor and auto-assembly industry, but can be also used in the biomedical industry (laboratory automation), where simplicity and performance are key objectives.
Compared to the DP-100 series, which features a multitude of functions, the DP-0 Series has been designed to make configuration fast and simple.
Two Levels of Configuration for Easy Operation
Simple And Highly Visible Display
Compact and Lightweight Design
Two Types Available: Low-pressure type (-100kPa to +100kPa) and High-pressure type (0 To 1MPa)
Digital Pressure Sensor [For Gas] DP-0
Part number list
Results 8
Models table for series Digital Pressure Sensor [For Gas] DP-0
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg
500 kPa
Air, non-corrosive gas
kPa, kgf/cm2, bar, psi, mmHg
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.2 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and +V) - Residual voltage: 2 V or less (at 50 mA source current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi
1.5 MPa
Air, non-corrosive gas
MPa, kgf/cm2, bar, psi
12 to 24 V DC ±10 % Ripple P-P 10 % or less
30 mA or less
NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between comparative output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current)
Selectable either NO or NC by key operation
Minimum 2 digits (variable)
±0.4 % F.S. (within ±4 digits)
2.5 ms, 25 ms, 250 ms, selectable by key operation
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Two Levels of Configuration for Easy Operation
The two-level settings menu allows for quick and simple operation.
•"RUN mode" configures the threshold value, zero-point adjustment, and key lock/release settings
•"Detailed configuration" configures the sensor's basic operation settings
Simple and Highly Visible Display
The high-contrast LCD offers excellent visibility and a wide viewing angle so that the display is easy to see even from an oblique angle.
Compact and Lightweight Design
With a measured depth of only 24.9 mm (0.980 in) and a weight of 25 g, the DP-0 can be installed in tight spaces and presents a minimal load when mounted on a moving part such as a robot arm.
Two Types Available: Low-Pressure Type and High-Pressure Type
The DP-0 series offers both a low-pressure type sensor and a high-pressure type sensor to support various applications. The low-pressure type is suitable for either positive or negative pressure, while the high-pressure type is suitable for positive pressure of up to 1 MPa.