Specification

Specifications table for model CA2-T1
ItemPerformance characteristics
Supply Voltage 24 V DC ± 10 % Ripple P-P 10 % or less
Power Consumption2.8 W or less
Analog Inputs : Input Range4 to 20 mA
Analog Inputs : Input Impedance20 Ω
Analog Inputs: No. Of Inputs1 No.
Analog Inputs : Input MethodSingle end input
Analog Inputs : A/D Conversion MethodSuccessive approximation method
Analog Inputs : Sampling RateSelectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
Zero-Adjust Input (0-ADJ.) / Auto-Reference Input (A-REF.)Input condition: Non-voltage contact or NPN open-collector transistor input
Signal condition: Negative logic, Input time duration 10 ms or more
Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open
Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
Start/Hold Input High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
Comparative Outputs (OUT 1, OUT 2)NPN open-collector transistor
・ Maximum sink current: 100 mA
・ Applied voltage: 35 V DC or less (between comparative output and GND)
・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Comparative Outputs (OUT 1, OUT 2): Response Time5 ms or less
(when start / hold input is used at a sampling rate of 200 times/sec.)
Comparative Outputs (OUT 1, OUT 2): HysteresisVariable from 1 to 3,999 digits
Display4 digit 7-segment red LED display
(letter height: 8 mm 0.315 in)
Display: Display Refresh RateSelectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
Display: Display RangeSelectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
Display: Temperature Characteristics±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
Display: Display Accuracy±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
Threshold Value Setting Range-9999 to +9999
Setting Resolution1 digit
Indicators: Polarity IndicationRed LED
(lights up when the displayed value or the threshold value is negative)
Indicators: Out 1 OperationOrange LED
(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.
Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
Indicators: Auto-Reference Operation Green LED
(lights up when auto-reference function is used)
Indicators: Out2 OperationOrange LED
(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.
Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
FunctionAuto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
Environmental Resistance: Ambient Temperature0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
Environmental Resistance: Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental Resistance: Voltage Withstandability1,500 V AC for one min. between all supply terminals connected together and enclosure
Environmental Resistance: Insulation Resistance100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Environmental Resistance: Vibration Resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental Resistance: Shock Resistance294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
Back-Up MemoryNon-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
MaterialEnclosure: Polycarbonate
Connecting MethodTerminal block connection
Net Weight Net weight: 55 g approx.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.