ON / OFF Input Sensor Controller NPS

The ON / OFF Input Sensor Controller NPS is a multi-functional slim Sensor Controller. Two Sensors can be connected and two independent outputs are generated. Two outputs: contact and non-contact.

Part Number List

Results 4
Models table for series ON / OFF Input Sensor Controller NPS
Part No.DatasheetConnectable sensorsSupply Voltage Power ConsumptionPower Supply for Sensor: VoltagePower Supply for Sensor: Current OutputOutput: Output OperationResponse TimeIndicators: Power Indicators: Output Indicators: Sensor Signal Input Indicators: External Synchronization InputExternal Synchronization FunctionTimer Function Environmental Resistance: Ambient TemperatureEnvironmental Resistance: Ambient HumidityEnvironmental Resistance: Voltage WithstandabilityEnvironmental Resistance: Insulation ResistanceEnvironmental Resistance: Vibration ResistanceEnvironmental Resistance: Shock ResistanceMaterialNet Weight Connecting MethodAccessory
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
150 mA max.
Relay contact 1c
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

NPN open-collector transistor
・Maximum sink current : 100 mA or less
・Applied voltage : 30 V DC or less(between output and 0 V)
・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable normal operation or inverse operation
Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
Gate trigger
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Net weight: 160 g approx.
Terminal block
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
130 mA max.
Relay contact 1c
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

NPN open-collector transistor
・Maximum sink current : 100 mA or less
・Applied voltage : 30 V DC or less(between output and 0 V)
・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable normal operation or inverse operation
Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
Red LED
(lights up when the sensor signal input is effective)
Red LED
(lights up when the external synchronization input is effective)
Gate trigger and edge trigger
Three function selectable timer
(Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Net weight: 160 g approx.
Terminal block
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc.
Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
100 to 240 V AC±10%
6 VA or less
12 V DC ± 10 % (incorporated with short-circuit protection)
120 mA max.
Relay contact 1c x2
・Switching capacity : 250 V 3 A AC (resistive load)
・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)
Switchable normal operation or inverse operation
10 ms approx.
Red LED (lights up when the power is ON)
Red LED (lights up when the output is ON)
Note : In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated.
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,500 V AC for one min. between the power and the output terminals
10 MΩ, or more, with 500 V DC megger between the power and the output terminals
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
Net weight: 160 g approx.
Terminal block
Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc.