Specifications
| Item | Performance characteristics |
|---|---|
| Sensing Object | Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc. Note : Highly viscous liquid may not be detected stably. Note : The agents mentioned above are examples. For details, please contact our office. Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office. |
| Supply Voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current Consumption | 15 mA or less |
| Output | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
| Output: Output Operation | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 50 ms or less |
| Fault Indicator | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Normal Indicator | Green LED (lights up when the sensor is mounted properly) |
| Protection | IP67 (IEC) |
| Ambient Temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Emitting Element | Infrared LED (non-modulated) |
| Material | Enclosure: PFA |
| Cable Extension | Extension up to total 50 m |
| Accessory | MS-EX-F6-2(PVC mounting bracket): 1 pc. |