Item | Performance characteristics |
---|---|
Sensing Object | Water, Fluorinert™ Note:Highly viscous liquid may not be detected stably. Note:Fluorinert is the world wide trademark of 3M. |
Supply Voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current Consumption | 10 mA or less(PNP output type: 15 mA or less) |
Output | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
Output: Output Operation | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
Output: Short-Circuit Protection | Incorporated |
Response Time | 50 ms or less |
Fault Indicator | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
Normal Indicator | Green LED (lights up when the sensor is mounted properly) |
Protection | IP67 (IEC) |
Ambient Temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ Note : Liquid being detected should also be kept within the rated ambient temperature range. |
Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient Illuminance | Incandescent light: 1,000 ℓx or less at the light-receiving face |
Emitting Element | Infrared LED (non-modulated) |
Material | Enclosure: Polypropylene |
Cable Extension | Extension up to total 50 m |
Accessory | MS-EX-F7-2, MS-EX-F7-3(PVC mounting bracket) : 1 pc. Note : The mounting bracket for EX-F71(-PN) is not interchangeable with that of EX-F72(-PN) due to the different sensitivity settings of each sensor. each for two-point-fixing and adhesive-fixing |
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.