Specification

Specifications table for model BE-A301P
ItemPerformance characteristics
Detectable Air Gap0.8 mm 0.032 in or more
(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops.
Sensing Object Liquid
(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly.
Applicable Tube Dia. (OD × ID)ø3 mm × ø2 mm
ø1/8 in × ø1/16 in
(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use.
Applicable Tube TypeTransparent resin tube (equivalent to PFA)
(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use.
Supply Voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current Consumption15 mA or less
Output (Incorporated with 2 outputs)PNP open-collector transistor
•Maximum source current: 50 mA
•Applied voltage: 30 V DC or less (between output and + V)
•Residual voltage: 2 V or less (source current at 50 mA) 1 V or less (source current at 16 mA)
Output (Incorporated with 2 outputs): Output OperationSwitchable either Liquid-absent-ON or Liquid-present-ON
Output (Incorporated with 2 outputs): Short-Circuit ProtectionIncorporated
Response Time: When Detecting Bubble20 μs or less
(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use.
Response Time: When Detecting Liquid 80 μs or less
(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use.
Operation Indicator Orange LED (lights up with absent liquid)
Protection CircuitsPower supply reverse polarity protection , Output reverse polarity protection
Environmental Resistance: Ambient Temperature-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉
(Note) Liquid being detected should also be kept within the rated ambient temperature range.
Environmental Resistance: ProtectionIP40 (IEC)
Environmental Resistance: Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental Resistance: Ambient IlluminanceFluorescent light: 1,000 ℓx at the light-receiving face
Environmental Resistance: Voltage Withstandability1,000 V AC for between one min. between all supply terminals connected together and enclosure
Environmental Resistance: Insulation Resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental Resistance: Vibration Resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each
Environmental Resistance: Shock Resistance100 m/s2 acceleration in X, Y, and Z directions three times each
Emitter ElementInfrared LED(Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
MaterialEnclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate
Cable0.09 mm2 4-core cabtyre cable 1 m 3.280 ft
Cable ExtensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m 65.167 ft.
Clamping Torque0.5N•m or less
Weight (Typ.)Net weight: 15 g approx., Gross weight: 25 g approx.
Compliant RegulationEMC Directive compliance, RoHS Directive compliance

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.