| | Number of connectable units: Max. 2 units. | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) | 500 mA approx. at 2 sensor heads connected
350 mA approx. at 1 sensor head connected
(100 mA approx. is additionally required when the mini console is connected) | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms | Voltage output scale: -5 to +5 V / F.S (initial value)
Output range during normal status: -10.0 to +10.0 V
Output at abnormal status: -10.8 V or +10.8 V
Resolution: 2 mV
Linearity: plus or minus 0.05 % F.S.
Max. 2 mA, output impedance 50 Ohm
Response delay time: 1.5 micro s / V approx.
(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. | Current output scale: 4 to 20 mA / F.S (initial value)
Output range during normal status: 2 to 24 mA
Output at abnormal status: 1 mA or 25 mA
Resolution: 3 micro A, Linearity plus or minus 0.05% F.S.
Load impedance: 250 Ohm max.
Response delay time: 10 micro s approx.
(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. | PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between each output and +V)
- Residual voltage: 1 V or less (at 100 mA source current) | Opened when the amount of light is insufficient | Incorporated | PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between each output and +V)
- Residual voltage: 1 V or less (at 100 mA source current) | Opened at output operation | Incorporated | PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between each output and +V)
- Residual voltage: 1 V or less (at 100 mA source current) | Opened at data determination | Incorporated | PNP open-collector transistor
- Laser emission is delayed when connected to IL (+).
- Laser emission stops at open
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | PNP open-collector transistor
- Laser emission is stopped when connected to external power (+).
- Laser is emitted immediately after opened.
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | PNP open-collector transistor
- Zero set is ON when connected with external power (+).
- Zero set turns to OFF after continuously connected to external power (+) for one second.
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | PNP open-collector transistor
- ON at / during connection to external power (+)(depending on analysis mode)
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | PNP open-collector transistor
- Reset is done when connected to external power (+).
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | PNP open-collector transistor
- Memory is specified when connected to external power (+).
- Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | USB 2.0 Full-speed (USB 1.1 compatible) compliant | Compact console (optional) | Green LED (lights up at power on) | Green LED (lights up during or immediately before laser emission of sensor head A) | Green LED (lights up during or immediately before laser emission of sensor head B) | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit | 35 to 85 %RH | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each | 196 m / s2 acceleration (20G approx.) in X, Y, and Z directions for three times each | Case: Polycarbonate | 450 g approx. | USB cable (2 m 6.562 ft long): 1 pc.
Short bracket: 1 pc.
Ferrite cores (E04SR200935A, by Seiwa Electric Mfg. Co., Ltd.): 3 pcs |
| | Number of connectable units: Max. 2 units. | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) | 500 mA approx. at 2 sensor heads connected
350 mA approx. at 1 sensor head connected
(100 mA approx. is additionally required when the mini console is connected) | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms | Voltage output scale: -5 to +5 V/F.S (initial value)
Output range during normal status: -10.0 to +10.0 V
Output at abnormal status: -10.8 V or +10.8 V
Resolution: 2 mV, Linearity: plus or minus 0.05 % F.S.
Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.
(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. | Current output scale: 4 to 20 mA/F.S (initial value)
Output range during normal status: 2 to 24 mA
Output at abnormal status: 1 mA or 25 mA
Resolution: 3 micro A, Linearity plus or minus 0.05% F.S.
Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.
(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between alarm output and Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened when the amount of light is insufficient | Incorporated | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between judgment output to Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened at output operation | Incorporated | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between strobe output to Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened at data determination | Incorporated | Laser emission is delayed when connected to Common (-).
Laser emission stop at open
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Laser emission is stopped when connected to Common (-).
Laser is emitted immediately after opened.
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Zero set is ON when connected with Common (-).
Zero set turns to OFF after continuously connected to Common (-) for one second.
Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | ON at/during connection to Common (-)(depending on analysis mode)
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Reset is done when connected to Common (-).
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Memory is specified when connected to Common (-).
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | | | Green LED (lights up at power on) | Green LED (lights up during or immediately before laser emission of sensor head A) | Green LED (lights up during or immediately before laser emission of sensor head B) | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit | 35 to 85 %RH | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each | Case: Polycarbonate | 450 g approx. | USB cable (2 m 6.562 ft long): 1 pc.
Short bracket: 1 pc. |
| | Number of connectable units: Max. 2 units. | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) | 500 mA approx. at 2 sensor heads connected
350 mA approx. at 1 sensor head connected
(100 mA approx. is additionally required when the mini console is connected) | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms | Voltage output scale: -5 to +5 V/F.S (initial value)
Output range during normal status: -10.0 to +10.0 V
Output at abnormal status: -10.8 V or +10.8 V
Resolution: 2 mV, Linearity: plus or minus 0.05 % F.S.
Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.
(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. | Current output scale: 4 to 20 mA/F.S (initial value)
Output range during normal status: 2 to 24 mA
Output at abnormal status: 1 mA or 25 mA
Resolution: 3 micro A, Linearity plus or minus 0.05% F.S.
Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.
(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between alarm output and Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened when the amount of light is insufficient | Incorporated | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between judgment output to Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened at output operation | Incorporated | NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less[between strobe output to Common(-)]
- Residual voltage: 1 V or less(at 100 mA sink current) | Opened at data determination | Incorporated | Laser emission is delayed when connected to Common (-).
Laser emission stop at open
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Laser emission is stopped when connected to Common (-).
Laser is emitted immediately after opened.
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Zero set is ON when connected with Common (-).
Zero set turns to OFF after continuously connected to Common (-) for one second.
Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) | ON at/during connection to Common (-)(depending on analysis mode)
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Reset is done when connected to Common (-).
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | Memory is specified when connected to Common (-).
Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) | | | Green LED (lights up at power on) | Green LED (lights up during or immediately before laser emission of sensor head A) | Green LED (lights up during or immediately before laser emission of sensor head B) | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit | 35 to 85 %RH | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each | Case: Polycarbonate | 450 g approx. | USB cable (2 m 6.562 ft long): 1 pc.
Short bracket: 1 pc. |
