LD-C60
Specification
| Item | Performance characteristics |
|---|---|
| Applicable Sensor Head | LD-600, LD-601 |
| Sensing Modes | Width measurement, edge measurement |
| Measuring Accuracy | Width measurement: plus or minus 44 micro m plus or minus 1.732 mil Edge measurement: plus or minus 22 micro m plus or minus 0.866 mil |
| Supply Voltage | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current Consumption | 250 mA or less (including sensor head) |
| Input (REQ, SHD) | Signal conditions: Low...0 to 1 V High...5 to 30 V, or open Applied voltage: 30 V DC or less |
| Output (ACK, D0 to D10) | NPN open-collector transistor -Maximum sink current: 20 mA -Applied voltage: 30 V DC or less (between output and 0 V) -Residual voltage: 1 V or less (at 20 mA sink current) |
| Output (ACK, D0 to D10): Output operation | ACK: ON during data output D0 to D10: pixel binary output |
| Response Time | 1.2 ms or less |
| Indicators: Power | Red LED (lights up when the power is ON) |
| Indicators: REQ | Red LED (lights up when the REQ input is Low) |
| Indicators: ACK | Red LED (lights up when the ACK output is ON) |
| Measurement Display | 4 digit LED (letter height 8 mm 0.315 in) |
| Measurement Display: Display Resolution | 10 micro m 0.394 mil |
| Ambient Temperature | 0 to +40 degrees +32 to +104 degrees Fahrenheit (No dew condensation) Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Material | Enclosure: ABS Front panel: ABS Display panel: Polycarbonate Terminal cover: Polycarbonate |
| Weight (Typ.) | Net weight: 230 g approx. |
| Accessory | Connector: 1 pc. |