Manually Set Fiber Sensor FX-311

The FX-311 Manually Set Fiber Sensor (Red LED Type) employs Panasonic's new "four-chemical LED", first found in the FX-301 (Red LED Type) to suppress changes in the light emitting element over time to achieve a stable level of light emission that can be maintained over long periods and almost never requires adjustment. By incorporating this new technology, the FX-311 Sensor is able to deliver superior performance for a variety of applications.

Part Number List

Results 6
Models table for series Manually Set Fiber Sensor FX-311
Part No.DatasheetSupply Voltage Power ConsumptionOutputOutput: Output Operation Output: Short-Circuit ProtectionResponse TimeOperation Indicator Stability IndicatorSensitivity AdjusterTimer Function Automatic Interference Prevention FunctionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting Element (Modulated): Peak Emission WavelengthEmitting Element (Modulated)MaterialCable LengthConnecting MethodWeight (Typ.)
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
NPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
650 nm 0.026 mil
Red LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
PNP open-collector transistor
• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
470 nm 0.019 mil
Blue LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
NPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
525 nm 0.021 mil
Green LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
PNP open-collector transistor
• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
650 nm 0.026 mil
Red LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
PNP open-collector transistor
• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
525 nm 0.021 mil
Green LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.
12 to 24 V DC ±10 % Ripple P-P 10 % or less
840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
NPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Selectable either Light-ON or Dark-ON, with selection switch
Incorporated
150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Orange LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Incorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
470 nm 0.019 mil
Blue LED
Enclosure: Heat-resistant ABS, Case cover: Polycarbonate
Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx., Gross weight: 20 g approx.