Specification

Specifications table for model FX-311B
ItemPerformance characteristics
Supply Voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power Consumption840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
OutputNPN open-collector transistor
• Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less [at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Output: Output Operation Selectable either Light-ON or Dark-ON, with selection switch
Output: Short-Circuit ProtectionIncorporated
Response Time150 μs or less (FAST), 250 μs or less (STD), 2 ms or less (LONG) selectable with selection switch
Operation Indicator Orange LED (lights up when the output is ON)
Stability IndicatorGreen LED (lights up under stable light received condition or stable dark condition)
Sensitivity Adjuster12-turn potentiometer with indicator (Pointer part: red backlight)
(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted.
Timer Function Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective
Automatic Interference Prevention FunctionIncorporated (Up to 4 sets of fiber heads can be mounted close together.)
(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention.
Ambient Temperature-10 to +55 ℃ -14 to +131 ℉
(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 ℓx at the light-receiving face
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Insulation Resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
Vibration Resistance10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each
Shock Resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
Emitting Element (Modulated): Peak Emission Wavelength470 nm 0.019 mil
Emitting Element (Modulated)Blue LED
MaterialEnclosure: Heat-resistant ABS, Case cover: Polycarbonate
Cable LengthTotal length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Connecting MethodConnector
(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft)
Weight (Typ.)Net weight: 15 g approx., Gross weight: 20 g approx.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.