For the CX-400 Series, the user has a large selection of ultra compact Photoelectric Sensors at his disposal. The Series includes three thru-beam, five retro-reflective, four diffuse reflective and four trigonometric types with foreground/background suppression. With its new ASIC (application specific integrated circuit), the Sensors require up to 60% less energy than before.
Characteristics
Three Thru-Beam, Five Retro-Reflective, Eight Reflective Types
Light ON/Dark ON Modes
Short-Circuit Protected
IP67 Degree Of Protection
Up To 60% Less Power Consumption
Compact Photoelectric Sensor CX-400 Ver.2
Part number list
Results 168
Models table for series Compact Photoelectric Sensor CX-400 Ver.2
Part No.
Datasheet
CE Marking Directive Compliance
Sensing Range
Sensing Object
Repeatability (Perpendicular to Sensing Axis)
Hysteresis
Supply Voltage
Current Consumption
Output
Output: Output Operation
Output: Short-Circuit Protection
Response Time
Operation Indicator
Stability Indicator
Power Indicator
Sensitivity Adjuster
Automatic Interference Prevention Function
Protection
Ambient Temperature
Ambient Humidity
Ambient Illuminance
Voltage Withstandability
Insulation Resistance
Vibration Resistance
Shock Resistance
Emitting Element (Modulated)
Emitting Element (Modulated): Peak Emission Wavelength
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
-
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
-
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 15 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
-
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
-
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Ø12 mm Ø0.472 in or more opaque object (Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
0.5 mm 0.020 in or less
-
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 20 mA or less Receiver: 10 mA or less
PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current)
Switchable either Light-ON or Dark-ON
Incorporated
1 ms or less
Orange LED(lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Green LED(lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type)
Green LED(lights up when the power is ON) (incorporated on the emitter)
Continuously variable adjuster(incorporated on the receiver for thru-beam type)
-
IP67 (IEC)
- 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each