Adjustable Range Reflective Photoelectric Sensor EQ-30

The compact EQ-30 Adjustable Range Reflective Photoelectric Sensor is only 68 x 20 x 40mm but delivers amazing performance. Normal Reflective Type Sensors operate by sensing the variation in the amount of incident beam. However, the Adjustable Range Reflective Sensing Type Sensors, incorporate a 2-segment photodiode to sense variation in the incident beam angle. Thus, the output is activated according to the distance of the object from the Sensor. This system helps the EQ-30 Series to be unaffected by object color or a background, enabling stable sensing. The robust housing offers IP67 protection allowing the EQ-30 Sensor to be used in the most demanding industrial environments.

Characteristics:

•Triangulation Detection Principle With 2m Sensing Range
•Two Sensing Distances Are Adjustable (EQ-34W)
•Highly Independent Of Object Color
•Background Suppression
•Automatic Cross Talk Suppression
•Compact Design
•Short-Circuit Protection
•Switchable Output Operation (Detection On/Off)
•Mounting Accessories
•M12 Connector (-J) Or Cable Type

Part Number List

Results 5
Models table for series Adjustable Range Reflective Photoelectric Sensor EQ-30
Part No.DatasheetCE Marking Directive ComplianceAdjustable RangeSensing Range (With White Non-Glossy Paper at Setting Distance 2 m 6.562 ft)HysteresisRepeatabilitySupply Voltage Current ConsumptionOutputOutput: Utilization Category Output: Output Operation Output: Short-Circuit ProtectionResponse TimeOperation Indicator Stability IndicatorDistance AdjusterAutomatic Interference Prevention FunctionPollution Degree ProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)Accessory
EMC Directive, RoHS Directive
0.2 to 2 m 0.656 to 6.562 ft
(Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away.
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance (With white non-glossy paper)
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
2-turn mechanical adjuster with pointer
Incorporated
(Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects.
3 (Industrial environment)
IP67 (IEC)
-20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polyalylate and Polyethylene terephthalate
Lens: Polyalylate
0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 150 g approx
Gross weight: 200 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2 m 0.656 to 6.562 ft
(Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away.
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance (With white non-glossy paper)
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
2-turn mechanical adjuster with pointer
Incorporated
(Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects.
3 (Industrial environment)
IP67 (IEC)
-20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polyalylate and Polyethylene terephthalate
Lens: Polyalylate
0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2 m 0.656 to 6.562 ft
(Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away.
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance (With white non-glossy paper)
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
55 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and + V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
2-turn mechanical adjuster with pointer
Incorporated
(Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects.
3 (Industrial environment)
IP67 (IEC)
-20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polyalylate and Polyethylene terephthalate
Lens: Polyalylate
0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 150 g approx
Gross weight: 200 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2 m 0.656 to 6.562 ft
(Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away.
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance (With white non-glossy paper)
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
2-turn mechanical adjuster with pointer
Incorporated
(Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects.
3 (Industrial environment)
IP67 (IEC)
-20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polyalylate and Polyethylene terephthalate
Lens: Polyalylate
0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 150 g approx
Gross weight: 200 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
0.2 to 2 m 0.656 to 6.562 ft
(Note) The adjustable range stands for the maximum sensing range which can be set with the adjuster.
The sensor can detect an object 0.1 m 0.328 ft, or more, away.
0.1 to 2 m 0.328 to 6.562 ft
10 % or less of operation distance (With white non-glossy paper)
Along sensing axis: 10 mm 0.394 in or less, Perpendicular to sensing axis: 1 mm 0.039 in or less (with white non-glossy paper)
10 to 30 V DC Ripple P-P 10 % or less
55 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and + V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
Switchable either Detection-ON or Detection-OFF
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
2-turn mechanical adjuster with pointer
Incorporated
(Note) Detection may become unstable depending on the setting conditions or the sensing objects. After setting up this product, make sure to check operations using actual sensing objects.
3 (Industrial environment)
IP67 (IEC)
-20 to +55 ℃ -4 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: Polyalylate and Polyethylene terephthalate
Lens: Polyalylate
0.3 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 150 g approx
Gross weight: 200 g approx
Adjusting screwdriver: 1 pc.