Specifications table for model DPH-L113V
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Type of Pressure Sealed gauge pressure
(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa.
Rated Pressure Range -0.1 to +1 MPa
Pressure Withstandability2 MPa
Applicable FluidGases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7
Supply Voltage 9 to 36 V DC
[9 to 32 V DC when using the attached connector (e-CON)]
Current Consumption20 mA or less
Analog Voltage OutputOutput voltage: 1 to 5 V DC (over rated pressure range)
Accuracy: ±1.0 % F.S. (at 23 ±2 ℃ +73.4 ±35 ℉)
±2.0 % F.S. (at -20 to 70 ℃ -4 to +158 ℉)
(including linearity, hysteresis and repeatability)
Response Time1 ms or less
ProtectionIP67 (IEC)
Ambient Temperature-20 to +70 ℃ -4 to +158 ℉ (No dew condensation or icing allowed),
Storage: -30 to +70℃ -22 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage : 35 to 85 % RH
Medium Temperature Range-20 to +70 ℃ -4 to +158 ℉
Voltage Withstandability150 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each
(Note): The X, Y, and Z directions are defined as follows :
Shock Resistance1,000 m/s2 acceleration in X, Y and Z directions three times each
Grounding MethodCapacitor earth (Enclosure-supply terminal)
Pressure Port R1/4 male thread (throttle embeded)
MaterialDiaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7)
Connecting MethodConnector
Cable0.2 mm2 3-core heat resistant cabtyre cable 2 m 3.562 ft long
Cable ExtensionExtension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable.
Weight (Typ.)Net weight : 100 g approx., Gross weight : 150 g approx.
AccessoriesConnector (e-CON) : 1 pc.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
The sensor head can be used independently.
DummyCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)

Stock Check


The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.