Compact Size Picking Sensor NA1-PK3

With an ultra-compact size of 24mm × 70mm × 8mm (W x H x D), the Panasonic NA1-PK3 Series General Purpose Area Sensors can be installed in bins designed to house small parts. Panasonic's unique beam scanning system reduces wiring and installation time while incorporating a mutual interference prevention function that provides correct operation even in multi-stage parts boxes.

Characteristics

  • Space-Saving, Pocket Lighter-Sized Unit
  • Utilizes A Large, Bright, Clearly Visible Job Indicator
  • No Synchronization Wires Required
  • Switchable Output Operation
  • Easy Alignment
  • Flexible Cable Orientation
  • Sensor Protection Brackets Available

You May Also Be Interested In Time of Flight (ToF) Camera Sensors

Instantly Detect Distance With Time of Flight (ToF) Camera Sensors

Panasonic Time of Flight (ToF) Cameras are compact, real-time, sensing cameras based on the ToF principle. Available in indoor and outdoor models, these cameras instantly detect distance between the camera and the targeted object with depth, infrared, and color (RGB) images. The GC1 indoor model produces RGB (640x480), depth map (320x240) (640x480) images. As well, engineers no longer need separate cameras for the depth, IR, and color images with 14/16/36 bit data formats. The HC4W outdoor model has a wide 90° FOV and is used in various applications such as security, autonomous vehicles and robotics.

Part Number List

Results 6
Models table for series Compact Size Picking Sensor NA1-PK3
Part No.DatasheetCE Marking Directive ComplianceSensing HeightSensing Range Beam PitchNumber of Beam Channels Sensing Object Supply Voltage Current ConsumptionOutputOutput: Utilization Category Output: Output Operation Output: Short-Circuit ProtectionResponse TimeIndicators: Emitter Indicators: ReceiverInterference Prevention FunctionPollution Degree ProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
Emitter: 50 g approx.
Receiver: 50 g approx.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is Low)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
EMC Directive, RoHS Directive
49.2 mm 1.937 in
30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
24.6 mm 0.969 in
3 beam channels
ø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Emitter: 30 mA or less
Receiver: 50 mA or less
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
DC-12 or DC-13
ON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Incorporated
10 ms or less (when interference prevention function is used: 30 ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Operation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Incorporated (Up to 3 units can be mounted close together.)
3 (Industrial environment)
IP62 (IEC)
-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.
Emitter: 50 g approx.
Receiver: 50 g approx.