| | EMC Directive, RoHS Directive | 220 mm 8.661 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.8 W or less | 0.7 W or less | 0.8 W or less | 0.7 W or less | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 400 g approx. Gross weight: 600 g approx. |
| | EMC Directive, RoHS Directive | 300 mm 11.811 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.9 W or less | 0.8 W or less | 0.9 W or less | 0.8 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 450 g approx. Gross weight: 650 g approx. |
| | EMC Directive, RoHS Directive | 220 mm 8.661 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.8 W or less | 0.7 W or less | 0.8 W or less | 0.7 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | |
| | EMC Directive, RoHS Directive | 220 mm 8.661 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.8 W or less | 0.7 W or less | 0.8 W or less | 0.7 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | |
| | EMC Directive, RoHS Directive | 140 mm 5.512 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.7 W or less | 0.6 W or less | 0.7 W or less | 0.6 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 350 g approx. Gross weight: 550 g approx. |
| | EMC Directive, RoHS Directive | 220 mm 8.661 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.8 W or less | 0.7 W or less | 0.8 W or less | 0.7 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 400 g approx. Gross weight: 600 g approx. |
| | EMC Directive, RoHS Directive | 300 mm 11.811 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.9 W or less | 0.8 W or less | 0.9 W or less | 0.8 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | |
| | EMC Directive, RoHS Directive | 380 mm 14.961 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 1.0 W or less | 0.9 W or less | 1.0 W or less | 0.9 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | |
| | EMC Directive, RoHS Directive | 380 mm 14.961 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 1.0 W or less | 0.9 W or less | 1.0 W or less | 0.9 W or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 500 g approx. Gross weight: 700 g approx. |
| | EMC Directive, RoHS Directive | 300 mm 11.811 in | 5 m 16.404 ft | 20 mm 0.787 in | dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 0.9 W or less | 0.8 W or less | 0.9 W or less | 0.8 W or less | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | ON when all beam channels are received (OFF when one or more beam channels are interrupted) | Incorporated | 10 ms or less (12 ms or less when the interference prevention function is used) | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) | Incorporated | Incorporated | 3 (Industrial environment) | IP40(IEC) | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.) | Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | Net weight: 450 g approx. Gross weight: 650 g approx. |