| | EMC Directive, RoHS Directive | 100 mm 3.937 in | 0.17 to 1 m 0.558 to 3.281 ft (Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) | 10 mm 0.394 in | 11 Nos. each on the emitter and the receiver, respectively | ø13.5 mm ø0.531 in or more opaque object (Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 80 mA or less Receiver: 100 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON or OFF when beam channel is interrupted, selectable by operation mode switch | Incorporated | In Dark state: 5 ms or less In Light state: 10 ms or less | Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) | Operation indicator: Orange LED (lights up when the output is ON) Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) | 3 (Industrial environment) | IP62 (IEC) | -10 to 55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system) | Enclosure: Heat-resistant ABS Lens: Acrylic Indicator cover: Acrylic | 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. | Net weight: Emitter 80 g approx., Receiver 85 g approx Gross Weight: 210 g approx. |
| | EMC Directive, RoHS Directive | 100 mm 3.937 in | 0.17 to 1 m 0.558 to 3.281 ft (Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) | 10 mm 0.394 in | 11 Nos. each on the emitter and the receiver, respectively | ø13.5 mm ø0.531 in or more opaque object (Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 80 mA or less Receiver: 100 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | ON or OFF when beam channel is interrupted, selectable by operation mode switch | Incorporated | In Dark state: 5 ms or less In Light state: 10 ms or less | Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) | Operation indicator: Orange LED (lights up when the output is ON) Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) | 3 (Industrial environment) | IP62 (IEC) | -10 to 55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system) | Enclosure: Heat-resistant ABS Lens: Acrylic Indicator cover: Acrylic | 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 5 m 16.404 ft long | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. | |
| | EMC Directive, RoHS Directive | 100 mm 3.937 in | 0.17 to 1 m 0.558 to 3.281 ft (Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) | 10 mm 0.394 in | 11 Nos. each on the emitter and the receiver, respectively | ø13.5 mm ø0.531 in or more opaque object (Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 80 mA or less Receiver: 100 mA or less | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) | DC-12 or DC-13 | ON or OFF when beam channel is interrupted, selectable by operation mode switch | Incorporated | In Dark state: 5 ms or less In Light state: 10 ms or less | Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) | Operation indicator: Orange LED (lights up when the output is ON) Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) | 3 (Industrial environment) | IP62 (IEC) | -10 to 55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 150 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880nm 0.035mil, cross-beam scanning system) | Enclosure: Heat-resistant ABS Lens: Acrylic Indicator cover: Acrylic | 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. | Net weight: Emitter 80 g approx., Receiver 85 g approx Gross Weight: 210 g approx. |