SF-C12
Specification
| Item | Performance characteristics |
|---|---|
| Connectable Safety Light Curtains | SF4B / SF4B-G series |
| Applicable Standards: International Standard | IEC 61496-1 (Type 4) |
| CE Marking Directive Compliance | Machinery Directive, Low Voltage (SF-C11/C13 only) Directive, EMC Directive, RoHS Directive |
| Applicable Standards: Japan | JIS B 9704-1 (Type 4), JIS B 9705-1(Category 4), |
| Applicable Standards: Europe (EU) | EN 61496-1 (Type 4), EN 55011, EN ISO 13849-1 (Category 4, PLe), IEC 61496-1 (Type 4), ISO 13849-1 (Category 4, PLe)(Note：SF-C11 and SF-C13 comply with UL 1998 (Class 2).) |
| Applicable Standards: North America | ANSI/UL 61496-1 (Type 4), UL 1998 (Class 2) (Note：SF-C11 and SF-C13 comply with UL 1998 (Class 2).) |
| Power Voltage | 24 V DC ±10 % Ripple P-P 10 % or less |
| Current Consumption | 100 mA or less (without light curtain) |
| Fuse Rating | Built-in electronic fuse, Triggering current: 0.5 A or more, Reset after power down |
| Safety Output | NO contact × 2 (13-14, 23-24) |
| Safety Output: Application Category | AC-15, DC-13 (IEC 60947-5-1) |
| Safety Output: Rated Operation Voltage (Ue)/Rated Operation Current (le) | 1 A / 24 V DC, resistive load (For inductive load, during contact protection) Min. applicable load: 15 mA (at 24 V DC) |
| Safety Output: Contact Material/Contacts | AgNiO + 0.2 micro m 0.008 mil Au plating, self cleaning, positively driven |
| Safety Output: Contact Resistance | 50 mOhm or less (initial value) |
| Safety Output: Contact Protection Fuse Rated | 3 A (slow blow) |
| Safety Output: Mechanical Lifetime | 10,000,000 times or more (open/close frequency of 180 times/min) (Note：The life expectancy of the relay varies depending on the type of load, open / close frequency, ambient conditions and others.) |
| Safety Output: Electrical Lifetime | 100,000 times or more (open/close frequency of 20 times/min, 230 V AC, 3 A, using resistance load) (Note：The life expectancy of the relay varies depending on the type of load, open / close frequency, ambient conditions and others.) |
| Pick-Up Delay (Auto Reset/Manual Reset) | 30 ms or less / 30 ms or less |
| Response Time | 14 ms or less |
| Auxiliary Outputs | Safety relay contact (NC contact) × 1 (31-32) (Related to enabling path) |
| Auxiliary Output: Rated Operation Voltage / Current | 30 V DC / 3 A, Min. applicable load: 15 mA (at 24 V DC) |
| Auxiliary Output: Contact Protection Fuse Rated | 3 A (slow blow) |
| Semiconductor Auxiliary Output (Aux) | - |
| Semiconductor Auxiliary Output (Aux): Output Operation | - |
| Overvoltage Category | III |
| Indicators: Power Supply (Ui) | Green LED (lights up when the power is ON) |
| Indicators: Safety Output [OUT] | Green LED (lights up when safety output is closed) (Note：The operation indicator is marked as "Enabling" on the unit for SF-C12.) |
| Indicators: Interlock | - |
| Indicators: Fault (Fault) | Orange LED (lights up when two safety light curtain input polarity selection switch settings are different) |
| External Relay Monitor Function | Incorporated (Note：Terminals for utilizing the functions of the SF4B / SF4B-G series are available.) |
| Trailing Edge Function | Incorporated |
| Pollution Degree | 2 |
| Polarity Selection Function | Incorporated (Sliding switch allows selection of plus/minus ground)
Minus ground: Correspond to PNP output safety light curtain
Plus ground: Correspond to NPN output safety light curtain (Note：Please switch the sliding switch to the PNP side for minus ground and to the NPN side for plus ground.) |
| Environmental Resistance: Degree of Protection | IP65 |
| Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Vibration Resistance | Resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y, and Z directions for two hours each |
| Enclosure Material | Die-cast aluminium |
| Connection Terminal | European terminal |
| Weight (Typ.) | Net weight: 1 kg approx. |
| Dummy | CE Marking (Machinery Directive, EMC Directive, RoHS Directive) |
| Applicable Standards | EN 61496-1 (Type 4), EN 55011, EN ISO 13849-1 (Category 4, PLe), IEC 61496-1 (Type 4), ISO 13849-1 (Category 4, PLe), JIS B 9704-1 (Type 4), JIS B 9705-1(Category 4), ANSI/UL 61496-1 (Type 4) |
| Excess Voltage Category | III |
Stock Check
Important
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.
