PAN1740A Series
Bluetooth® 5 Low Energy RF Module
The PAN1740A Series RF Module is Panasonic’s next-generation, optimized version of the existing PAN1740 Series Module, offering a reduced boot time and supporting up to eight (8) connections to allow greater flexibility to create more advanced applications.
The PAN1740A Series has a fully integrated radio transceiver and baseband processor for Bluetooth® 5.0 Low Energy. It can be used as a standalone application processor or as a data pump in hosted systems. The PAN1740A is optimized for remote control units (RCU) requiring support for voice commands and motion/gesture recognition. Its integrated Audio Unit (AU) offers easy interface for MEMS microphones over PDM, external codecs over PCM/I2S and a Sample Rate Converter unit.
The Bluetooth Low Energy firmware includes the L2CAP service layer protocols, Security Manager (SM), Attribute Protocol (ATT), the Generic Attribute Profile (GATT) and the Generic Access Profile (GAP). All profiles published by the Bluetooth SIG as well as custom profiles are supported. The transceiver interfaces directly to the antenna and is fully compliant with the Bluetooth 5.0 Standard.
The PAN1740A Series has dedicated hardware for the Link Layer implementation of Bluetooth Low Energy and interface controllers for enhanced connectivity capabilities.
The predecessor PAN1740 Series shares the same small form factor footprint and is compatible in the SDK.
FCC, IC and CE approval are under preparation.
The PAN1740A Evaluation Kits are provided in easy-to-use USB dongle form which are intended to enable users to quickly integrate Panasonic’s PAN1740A Series RF Module into their device.
The Dongles come with a PAN1740A Series Module onboard. The PAN1740A Series offers a reduced boot time and supporting up to eight connections. It has a fully integrated radio transceiver and baseband processor for Bluetooth 5 Low Energy. It can be used as a stand-alone application processor or as a data pump in hosted systems. The device is optimized for Remote Control Units (RCU) requiring support for voice commands and motion/gesture recognition. Its integrated Audio Unit (AU) offers easy interface for MEMS microphones over PDM, external codecs over PCM/I2S, and a Sample Rate Converter unit. The Bluetooth LE firmware includes the L2CAP service layer protocols, Security Manager (SM), Attribute Protocol (ATT), the Generic Attribute Profile (GATT), and the Generic Access Profile (GAP). All profiles published by the Bluetooth SIG as well as custom profiles are supported. The transceiver interfaces directly to the antenna and is fully compliant with the Bluetooth 5 standard. The PAN1740A Series has dedicated hardware for the Link Layer Implementation of Bluetooth LE and interface controllers for enhanced connectivity capabilities.
USB-Dongle Functionality:
- Atmel μC Includes Segger USB-to-UART Programmer
- OTP Cannot Be Damaged (Fail-Safe Development)
- Runs With Dialog®’s Keil® Compiler And Microsoft Visual Projects
- Runs With Connection Manager
- Can Be Used For Software Development “On The Fly”
General Features and Benefits:
- Pre-Programmed BT/MAC Address
- Includes 16 MHz And 32 768 kHz Crystal Calibrated Up To 1 PPM
- Single-Mode Bluetooth 5.0 System-On-Chip
- Programmable ARM CORTEX M0 CPU
- Autonomous BTLE Stand-Alone Operation
- Bluetooth v5.0 Embedded GATT– Low Energy Single Mode
- Small 9.0 mm x 9.5 mm x 1.8 mm SMD Package With Antenna
- Less Than A Few μA In Low Power Modes
- Integrated Shielding To Resist EMI
- No External Components Needed
PAN1740A Series
Part number list
PAN1781 Series Bluetooth® 5.3 Low Energy Module
Panasonic’s newest high technology Bluetooth 5.3 Low Energy Module device featuring the Nordic nRF52820 Single-Chip Controller! With a Cortex® M4 processor, 32kB RAM, and the built-in 256 kB flash memory, the PAN1781 Series RF Module can easily be used in standalone mode to eliminate the need for an external processor, saving complexity, space, and cost. An output power of up to 8 dBm and the high sensitivity of the nRF52820 in combination with the LE coded PHY make the NEW PAN1781 Series RF Module very attractive in applications where a long range is required. The PAN1781 Series RF Module also supports Bluetooth Mesh, Thread, and Zigbee Mesh Protocols.
Stay up to date
Playlist
Bluetooth Low Energy Modules Overview
Ask the Engineers - PAN1720 Bluetooth Module
PAN1740 Bluetooth Module Quick Start
Quick Clips: PAN1762 Series Bluetooth® 5.0 Low Energy RF Module
Quick Clips: PAN1780 Series Bluetooth® 5.0 Low Energy
NPI: PAN1781 Series Bluetooth® 5 Low Energy Module and Evaluation Kit
New Product Brief: PAN1770 Series Bluetooth® Low Energy RF Module
New Product Introduction: PAN1770 Series Bluetooth® 5.3 Low Energy RF Module
New Product Introduction: PAN1782 Series Bluetooth® 5.3 Low Energy Module
