The PAN1326B/1316B Series Bluetooth RF Modules from Panasonic, featuring both Bluetooth Low Energy and Bluetooth connectivity, based on Texas Instruments’ CC2564B controller, in an easy-to-use RF Module format with Bluetooth, FCC, IC and CE certifications.
A ROM update from Texas Instruments to the already popular CC2564 IC has allowed Panasonic to improve its top selling PAN1326/1316 Series. The PAN1326B/1316B Series Modules have increased system and power efficiencies resulting from reduced initialization script size, start-up time and decreased system memory requirements;supports ten simultaneous BLE connections -- increased from six -- and integrated SBC encoding and decoding for A2DP implementations, eliminating the requirement for an external CODEC.
Panasonic’s tiny footprint technology offers a Module of only 85.5 mm2 including antenna. The Modules are designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture.
The Bluetooth Low Energy (BLE) standard is designed to reduce power consumption by establishing very fast connections (few ms) and transferring small amounts of data. Using these techniques, energy consumption is reduced to a tenth of a Classic Bluetooth device. Bluetooth Smart Ready devices can communicate with both Bluetooth Classic and Bluetooth Low Energy devices. Smart Ready devices take advantage of the data rate of Bluetooth Classic (3Mb/s) and ultra fast connection time of Bluetooth Low Energy (3mS).
|Receiver Sensitivity||-93 dBm typ.||GFSK, Typical, Dirty TX On|
|Output Power||10 dBm typ.||VDD_In = VBAT|
|Power Supply||1.7 to 4.8 V||Battery or DC/DC|
|Ultra-Low Power Scan||135 μA||1.28s Interval|
|GFSK DH1/DH5||33 mA||Full Throughput|
|Operating Temperature||-40° to +85°C|
• Bluetooth Version 4.0 EDR
• Operating Temperature Range: -40 to +85°C
• High Sensitivity: -93dbm
• VCC Supply: 1.7 to 4.8 V
• Based on TI’s CC2564B
• Integrates with TI’s Ultra Low-Power MSP430 Microprocessor
• Very Fast Algorithm for Both ACL and eSCO
• Supports Extended Range Tx Power with 10dBm (Typ.)
Panasonic’s newest high technology Bluetooth 5 Low Energy Module device featuring the Nordic nRF52820 Single-Chip Controller! With a Cortex® M4 processor, 32kB RAM, and the built-in 256 kB flash memory, the PAN1781 Series RF Module can easily be used in standalone mode to eliminate the need for an external processor, saving complexity, space, and cost. An output power of up to 8 dBm and the high sensitivity of the nRF52820 in combination with the LE coded PHY make the NEW PAN1781 Series RF Module very attractive in applications where a long range is required. The PAN1781 Series RF Module also supports Bluetooth Mesh, Thread and Zigbee Mesh Protocols.