The PAN1780 Evaluation Kit(ENW89854AWKF) is an all-inclusive and comprehensive Evaluation Kit consisting of two USB dongles and two external NFC antennas. Each dongle allows design engineers to develop, run and debug code with the PAN1780 Series Module. The break-out headers provide an easy way to connect Sensors, as well as other devices for rapid prototyping.

The USB Evaluation Boards are delivered without any preinstalled software examples, but an integration guide is available explaining how to use the recommended development environment and the free Nordic Semiconductors Software Development Kit, to run different kinds of Bluetooth, thread, ZigBee, 802.15.4 and Antennae software examples.

More About the PAN1780 Series

The PAN1780 Series Bluetooth® 5.3 features enable a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s. The new channel selection algorithm (CSA#2) improves the performance in high interference environments. Furthermore, the new LE advertising extensions allow for much larger amounts of data to be broadcasted in connectionless scenarios.

General Features and Benefits:

• Surface Mount Type Dimensions: 15.6 mm x 8.7 mm x 2 mm
• Same Form Factor as PAN1026A and PAN1762 But Smaller Pitch And More Pins
• Nordic nRF52840 Featuring ARM® Cortex®-M4F With 64 MHz
• Bluetooth® 5.3 Low Energy Including LE 2M And LE Coded PHY
• Embedded 1 MB Flash Memory And 256 kB Internal RAM
• Includes ARM® TrustZone® CryptoCell® 310 And Supports Secure Boot Including Root-of-Trust (RoT)
• Up to 48 general purpose I/Os (GPIO), which are shared by up to 4 SPI, 2 I²C, 2 UART, 4 PWM, 8 ADC, 1 NFC-A, 32 kHz IN/OUT, nRESET
• USB 2.0 Full-Speed Device Interface
• Built-in Temperature Sensor