The PAN1783 Series Evaluation Boards are available with either PAN1783 or PAN1783A series Bluetooth 5.4 Low Energy Module in Arduino form factor, based on the Nordic Semiconductor nrf5340 single-chip controller. 

The evaluation board easily accesses all the different module interfaces, such as USB, UART, NFC, and GPIOs, which makes it ideal for module evaluation and rapid product prototyping. All GPIOs are led out via pin headers, and the Arduino form factor allows the connection of shields available on the mass market.

Reference Documents

• User Guide
• Software Development - Getting Started
• Samples and Demos
   

Part Numbers

Features of the PAN1783/1783A RF Modules

• Surface Mount Type Dimensions:15.6 mm × 8.7 mm × 2.2 mm
• Same Form Factor as PAN1780 With the Same Pitch But One More Pin
• Nordic nRF5340 Featuring Two Cortex®-M33 Processors: One as an Application Processor (with 128 MHz or 64 MHz operation, 512 kB RAM, Built-in 1 MB Flash Memory), and the Other One as a Network Processor (with 64 MHz operation, 64 kB RAM, 256 kB flash)
• Bluetooth 5.4 LE, including LE 2M and LE Coded
• Supports 802.15.4 ZigBee® and Thread
• Includes ARM TrustZone® CryptoCell™ 312, SPU, KMU, ACL
• Security Features: Trusted Execution, Root-of-Trust, Secure Key Storage, 128-bit AES
• Up to 48× General Purpose I/Os (GPIO), Which are Shared By Up to 5× SPI, 4× I²C, 4× UART, 4× PWM, 8× ADC, NFC-A, QSPI, nRESET
• USB 2.0 Full-Speed Device Interface