PAN9055/9045 Series

PAN9055/9045 is a 2.4GHz ISM band wireless radio module for implementing WLAN and Bluetooth functionality into various electronic devices. The cost-effective, low-power operation, system-on-chip (SoC) solutions enable wireless network applications to be built with low total bill-of-material costs. The radio module combines an excellent 802.11 and BT wireless radio, baseband processor and many other powerful supporting features and peripherals. MIMO 2x2 technology allows simultaneous data transmission over multiple streams using the same frequency. This results in greater range, higher throughput and is fully backwards compatible. The low-power operation is supporting deep sleep and standby modes by using the on-board power management unit. Layout design, calibration, and test efforts in production are reduced compared to discrete solutions resulting in precious advantage in terms of time-to-market. Panasonic offers a software package supporting various Fedora Core Kernel versions. The Hardware Interface Driver controls the hardware interface on the HOST side. Furthermore, the software package from Marvell® consists of various applications, demonstrations and utilities.

Other Wireless Connectivity Solutions

PAN9520-Module and Eval Kit-Content-Badge_414x233_4

PAN9520 SERIES EMBEDDED 2.4 GHZ WI-FI MODULE AND EVALUATION KIT

Panasonic’s New 2.4 GHz 802.11 b/g/n PAN9520 Series Embedded Wi-Fi RF Module based on Espressif ESP32-S2 that includes the powerful Xtensa® 32-bit LX7 CPU. Although the new PAN9520 Series is one of the smallest RF Modules on the market, it offers a rich set of peripherals like full-speed USB OTG, SPI, UART, I2C, and much more. The PAN9520 Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit that supports the Espressif Integrated Development Framework (ESP-IDF). It is an Arduino form factor board that has a PAN9520 RF Module with 4MB or 1MB of Flash memory, a 40MHz crystal oscillator and a chip antenna onboard.

Part Number List

Results 4
Models table for series PAN9055/9045 Series
Part No.DatasheetWiFiBluetooth (LE, Smart Ready)Basband ICMaximum Data Rate (Mbps)Transmit Output PowerMaximum Receiver SensitivityAntennaOperating TemperatureApple/Android SupportSleep Current Consumption (uA)Tx Current Consumption (mA)Size (mm) (mm)Power Supply Vdd Min.Power Supply Vdd Max.MIM0 (2x2)InterfaceOperating Frequency
b,g,n
Yes
Marvell
300
+18 dBm
-98 dBm
Integrated
0 ~ 70C
Yes
TBD
TBD
13.5 x 26 x2.4 | 351
3
3.6
Yes
UART, USB, SDIO
2.4 GHz
b,g,n
Yes
Marvell
300
+18 dBm
-98 dBm
None
0 ~ 70C
Yes
TBD
TBD
13.5 x 26 x2.4 | 351
3
3.6
Yes
UART, USB, SDIO
2.4 GHz
b,g,n
Yes
Marvell
300
+18 dBm
-98 dBm
Integrated
-30 ~ 85C
Yes
TBD
TBD
13.5 x 26 x2.4 | 351
3
3.6
Yes
UART, USB, SDIO
2.4 GHz
b,g,n
Yes
Marvell
300
+18 dBm
-98 dBm
None
-30 ~ 85C
Yes
TBD
TBD
13.5 x 26 x2.4 | 351
3
3.6
Yes
UART, USB, SDIO
2.4 GHz