Part Number List

Results 8
Models table for series Metal-sheet Double-feed Detector GD
Part No.DatasheetTypeSupply voltageCurrent consumptionOutputs (OUT-1 , OUT-2 , ALM. , Answer-back )Outputs (OUT-1 , OUT-2 , ALM. ,Answer-back ) : Output Operation : OUT-1Outputs (OUT-1 , OUT-2 , ALM. ,Answer-back ) : Output Operation : OUT-2Outputs (OUT-1 , OUT-2 , ALM. ,Answer-back ) : Output Operation : ALM.Outputs (OUT-1 , OUT-2 , ALM. ,Answer-back ) : Short-circuit protectionResponse timeSet level storage functionSet level teaching functionExternal setting functionIndicators : PowerIndicators : Self-diagnosis (ALM.)Indicators : Sensing mode (SENSE)Indicators : OUT-1Indicators : OUT-2Indicators : Sensing levelTimer functionEnvironmental resistance : Ambient temperatureEnvironmental resistance : Ambient humidityVoltage withstandabilityInsulation resistanceEnvironmental resistance : Vibration resistanceEnvironmental resistance : Shock resistanceMaterialWeight (Typ.)AccessoryApplicable ControllerSensing range (between sensor heads)Detectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 35 mm 1.378 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 35 mm 1.378 inDetectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 70 mm 2.756 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 70 mm 2.756 inEnvironmental resistance : ProtectionCableCable ExtensionDetectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 5 mm 0.197 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 5 mm 0.197 inDetectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 10 mm 0.394 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 10 mm 0.394 inDetectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 20 mm 0.787 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 20 mm 0.787 inDetectable sheet thickness : Applicable controllers GD-C1/C2 : Setting distance 30 mm 1.181 inDetectable sheet thickness : Applicable controllers GD-C3 : Setting distance 30 mm 1.181 in
Small object detection
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
12 V DC: 700 mA or less, 24 V DC: 400 mA or less
NPN open-collector transistor
-Maximum sink current: 100 mA
-Applied voltage: 30 V DC or less (between output and 0 V)
-Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
OFF above the one-sheet threshold level
OFF above the two-sheet threshold level
OFF when an error occurs
Incorporated
5 ms or less
Set values of eight channels stored
Incorporated
Incorporated
Green LED (lights up when the power is ON)
Red LED (lights up during SET mode and when an error occurs during RUN mode)
2-color indicator (lights up green during normal sensing mode, but yellow during precise sensing mode)
Green LED (lights up when OUT-1 is OFF, and blinks twice on completion of 0-ADJ. or SET-1 setting in SET mode)
Red LED (lights up when OUT-2 is OFF, and blinks twice on completion of 0-ADJ. or SET-2 setting in SET mode)
Yellow LED x 1 and green LED x 6 (indicate the sensing level)
Approx. 50 ms fixed delay timer (switchable either effective or ineffective)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 C° -13 to +158 ℉
45 to 85 % RH, Storage: 35 to 90 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Heat-resistant ABS
Net weight: 440 g approx.
Insulation plate: 2 pcs.
Standard
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
12 V DC: 700 mA or less, 24 V DC: 400 mA or less
NPN open-collector transistor
-Maximum sink current: 100 mA
-Applied voltage: 30 V DC or less (between output and 0 V)
-Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
OFF above the one-sheet threshold level
OFF above the two-sheet threshold level
OFF when an error occurs
Incorporated
Automatically selected either 5 ms or less, or 30 ms or less, depending on the object
Set values of eight channels stored
Incorporated
Incorporated
Green LED (lights up when the power is ON)
Red LED (lights up during SET mode and when an error occurs during RUN mode)
2-color indicator (lights up green during normal sensing mode, but yellow during precise sensing mode)
Green LED (lights up when OUT-1 is OFF, and blinks twice on completion of 0-ADJ. or SET-1 setting in SET mode)
Red LED (lights up when OUT-2 is OFF, and blinks twice on completion of 0-ADJ. or SET-2 setting in SET mode)
Yellow LED x 1 and green LED x 6 (indicate the sensing level)
Approx. 50 ms fixed delay timer (switchable either effective or ineffective)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 C° -13 to +158 ℉
45 to 85 % RH, Storage: 35 to 90 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Heat-resistant ABS
Net weight: 440 g approx.
Insulation plate: 2 pcs.
Long sensing range
-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
45 to 85 % RH, Storage: 35 to 95 % RH
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing face: Polyacetal
Main body: Stainless steel
Net weight: 440 g approx.
-
GD-C1, GD-C2
70 mm 2.756 in or less
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in
Iron(SPCC): 0.07 to 10 mm 0.003 to 0.394 in
Aluminum: 0.03 to 10 mm 0.001 to 0.394 in
Copper: 0.03 to 10 mm 0.001 to 0.394 in
Brass: 0.03 to 10 mm 0.001 to 0.394 in
Stainless steel (SUS304): 0.1 to 10 mm 0.004 to 0.394 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in
Iron(SPCC): 0.07 to 6 mm 0.003 to 0.236 in
Aluminum: 0.03 to 6 mm 0.001 to 0.236 in
Copper: 0.03 to 6 mm 0.001 to 0.236 in
Brass: 0.03 to 6 mm 0.001 to 0.236 in
Stainless steel (SUS304): 0.1 to 6 mm 0.004 to 0.236 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
IP67 (IEC), IP67G
Sender: 0.5 2 single core shielded cable, 3 m 9.843 ft long
Receiver: 0.3 2 2-core shielded cable, 3 m 9.843 ft long
Extension up to total 20 m 65.617 ft is possible with an equivalent shielded cable.
Small object detection
-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
45 to 85 % RH, Storage: 35 to 95 % RH
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
Enclosure: Stainless steel (SUS303)
Sensing face: ABS
Net weight: 90 g approx.
-
GD-C3
10 mm 0.394 in or less
IP67 (IEC)
Sender: 0.3 2 single core shielded cable, 3 m 9.843 ft long
Receiver: 0.1 2 2-core shielded cable, 3 m 9.843 ft long
Extension up to total 20 m 65.617 ft is possible with an equivalent shielded cable.
Standard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): 0.01 to 0.1 mm 0.0004 to 0.004 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 1 mm 0.001 to 0.039 in
Brass: 0.03 to 1 mm 0.001 to 0.039 in
Stainless steel (SUS304): 0.3 to 1 mm 0.012 to 0.039 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): -
Aluminum: -
Copper: -
Brass: -
Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 20 x 20 mm 0.787 x 0.787 in
Iron(SPCC): 0.03 to 0.1 mm 0.001 to 0.004 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 0.3 mm 0.001 to 0.012 in
Brass: 0.03 to 0.5 mm 0.001 to 0.020 in
Stainless steel (SUS304): 0.3 to 1 mm 0.012 to 0.039 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Long sensing range
-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
45 to 85 % RH, Storage: 35 to 95 % RH
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing face: Polyacetal
Main body: Stainless steel
-
GD-C1, GD-C2
70 mm 2.756 in or less
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): 0.07 to 10 mm 0.003 to 0.394 in, Aluminum: 0.03 to 10 mm 0.001 to 0.394 in, Copper: 0.03 to 10 mm 0.001 to 0.394 in, Brass: 0.03 to 10 mm 0.001 to 0.394 in, Stainless steel (SUS304): 0.1 to 10 mm 0.004 to 0.394 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): -, Aluminum: -, Copper: -, Brass: -, Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): 0.07 to 6 mm 0.003 to 0.236 in, Aluminum: 0.03 to 6 mm 0.001 to 0.236 in, Copper: 0.03 to 6 mm 0.001 to 0.236 in, Brass: 0.03 to 6 mm 0.001 to 0.236 in, Stainless steel (SUS304): 0.1 to 6 mm 0.004 to 0.236 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): -, Aluminum: -, Copper: -, Brass: -, Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
IP67 (IEC), IP67G
Sender: 0.5 2 single core shielded cable, 10 m 32.808 ft long
Receiver: 0.3 2 2-core shielded cable, 10 m 32.808 ft long
Extension up to total 20 m 65.617 ft is possible with an equivalent shielded cable.
Long sensing range
-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
45 to 85 % RH, Storage: 35 to 95 % RH
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing face: Polyacetal
Main body: Stainless steel
-
GD-C1, GD-C2
70 mm 2.756 in or less
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): 0.07 to 10 mm 0.003 to 0.394 in, Aluminum: 0.03 to 10 mm 0.001 to 0.394 in, Copper: 0.03 to 10 mm 0.001 to 0.394 in, Brass: 0.03 to 10 mm 0.001 to 0.394 in, Stainless steel (SUS304): 0.1 to 10 mm 0.004 to 0.394 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): -, Aluminum: -, Copper: -, Brass: -, Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): 0.07 to 6 mm 0.003 to 0.236 in, Aluminum: 0.03 to 6 mm 0.001 to 0.236 in, Copper: 0.03 to 6 mm 0.001 to 0.236 in, Brass: 0.03 to 6 mm 0.001 to 0.236 in, Stainless steel (SUS304): 0.1 to 6 mm 0.004 to 0.236 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
Standard sensing object size: 200 x 200 mm 7.874 x 7.874 in, Iron(SPCC): -, Aluminum: -, Copper: -, Brass: -, Stainless steel (SUS304): -
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in
the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above.
Please contact our office for details.
IP67 (IEC), IP67G
Sender: 0.5 2 single core shielded cable, 20 m 65.617 ft long
Receiver: 0.3 2 2-core shielded cable, 20 m 65.617 ft long
High precision
-10 to +60 degrees +14 to +140 degrees Fahrenheit , Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
45 to 85 % RH, Storage: 35 to 95 % RH
10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions three times each
Enclosure: Polyalylate
Net weight: 80 g approx.
Sensor head mounting bracket: 1 set for sender and receiver
GD-C1, GD-C2, GD-C3
30 mm 1.181 in or less
IP67 (IEC)
Sender: 0.3 2 single core shielded cable, 3 m 9.843 ft long
Receiver: 0.1 2 2-core shielded cable, 3 m 9.843 ft long
Extension up to total 20 m 65.617 ft is possible with an equivalent shielded cable.
Standard sensing object size: 80 x 80 mm 3.150 x 3.150 in
Iron(SPCC): 0.07 to 1 mm 0.003 to 0.039 in
Aluminum: 0.03 to 6 mm 0.001 to 0.236 in
Copper: 0.03 to 6 mm 0.001 to 0.236 in
Brass: 0.03 to 6 mm 0.001 to 0.236 in
Stainless steel (SUS304): 0.1 to 6 mm 0.004 to 0.236 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 80 x 80 mm 3.150 x 3.150 in
Iron(SPCC): 0.01 to 0.3 mm 0.0004 to 0.012 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 1 mm 0.001 to 0.039 in
Brass: 0.01 to 1 mm 0.0004 to 0.039 in
Stainless steel (SUS304): 0.05 to 2 mm 0.002 to 0.079 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 80 x 80 mm 3.150 x 3.150 in
Iron(SPCC): 0.07 to 0.5 mm 0.003 to 0.020 in
Aluminum: 0.03 to 2 mm 0.001 to 0.079 in
Copper: 0.03 to 2 mm 0.001 to 0.079 in
Brass: 0.03 to 2 mm 0.001 to 0.079 in
Stainless steel (SUS304): 0.1 to 2 mm 0.004 to 0.079 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
Standard sensing object size: 80 x 80 mm 3.150 x 3.150 in
Iron(SPCC): 0.01 to 0.1 mm 0.0004 to 0.004 in
Aluminum: 0.015 to 1 mm 0.001 to 0.039 in
Copper: 0.018 to 1 mm 0.001 to 0.039 in
Brass: 0.01 to 1 mm 0.0004 to 0.039 in
Stainless steel (SUS304): 0.05 to 1 mm 0.002 to 0.039 in
(Note) The above detectable sheet thicknesses are typical data at the given sensing distance. The allowable thickness will differ from the range described in the above table at other setting distances. Further, double feeds of aluminum foils can also be detected at distances shorter than the above. Please contact our office for details.
With RS-232C communication function
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
12 V DC: 700 mA or less, 24 V DC: 400 mA or less
NPN open-collector transistor
-Maximum sink current: 100 mA
-Applied voltage: 30 V DC or less (between output and 0 V)
-Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
OFF above the one-sheet threshold level
OFF above the two-sheet threshold level
OFF when an error occurs
Incorporated
Automatically selected either 5 ms or less, or 30 ms or less, depending on the object
Set values of eight channels stored
Incorporated
Incorporated
Green LED (lights up when the power is ON)
Red LED (lights up during SET mode and when an error occurs during RUN mode)
2-color indicator (lights up green during normal sensing mode, but yellow during precise sensing mode)
Green LED (lights up when OUT-1 is OFF, and blinks twice on completion of 0-ADJ. or SET-1 setting in SET mode)
Red LED (lights up when OUT-2 is OFF, and blinks twice on completion of 0-ADJ. or SET-2 setting in SET mode)
Yellow LED x 1 and green LED x 6 (indicate the sensing level)
Approx. 50 ms fixed delay timer (switchable either effective or ineffective)
-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 C° -13 to +158 ℉
45 to 85 % RH, Storage: 35 to 90 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
50 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Heat-resistant ABS
Net weight: 440 g approx.
Insulation plate: 2 pcs.

What's New

Stay up to date