External Input Unit for Digital Sensor FX-CH2

The Panasonic External Input Unit For Digital Sensor FX-CH2 will allow external access for teaching, data bank switching and other functionality.

Characteristics:

External Input Unit Can Monitor And Change Setting Up To 16 Sensors
External Teaching Can Be Done For Stable Sensing Applications.(Glass Substrates Or Sensing In Poor Environments)
Data Bank Switching And Key Lock Function Can Both Be Performed
Any PLC Or Touch Can Be Used Remotely To Perform Operations

Models table for series External Input Unit for Digital Sensor FX-CH2
Part No.	Datasheet	Applicable Sensors	Supply Voltage	Power Consumption	Input	Power Indicator	Transmission Operation Indicator	Ambient Temperature	Material	Connecting Method	Accessory	Weight (Typ.)
FX-CH2		FX-301(P) (Note) , FX-305(P) (Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	600 mW or less (when all indicators light up)	Low: 0 to +2 V DC Source current 0.5 mA Input impedance 10 kOhm approx. High: +5 V to +V DC, or open	Green LED (Lights up when the power is ON)	Green LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching)	-10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit	Enclosure: Heat-resistant ABS	Connector (Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (3-core) CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)	CN-EP1 (Connector for input device) (Note) : 1 pc. (Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less.	Net weight: 20 g approx. Gross weight: 40 g approx.
FX-CH2-P		FX-301(P) (Note) , FX-305(P) (Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	600 mW or less (when all indicators light up)	High: +4 V to +V DC Sink current 0.5 to 3 mA Input impedance 10 kOhm approx. Low: 0 to +0.6 V DC, or open	Green LED (Lights up when the power is ON)	Green LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching)	-10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit	Enclosure: Heat-resistant ABS	Connector (Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (3-core) CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)	CN-EP1 (Connector for input device) (Note) : 1 pc. (Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less.	Net weight: 20 g approx. Gross weight: 40 g approx.

Models table for series External Input Unit for Digital Sensor FX-CH2
Part No.	Datasheet	Applicable Sensors	Supply Voltage	Power Consumption	Input	Power Indicator	Transmission Operation Indicator	Ambient Temperature	Material	Connecting Method	Accessory	Weight (Typ.)
FX-CH2		FX-301(P) (Note) , FX-305(P) (Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	600 mW or less (when all indicators light up)	Low: 0 to +2 V DC Source current 0.5 mA Input impedance 10 kOhm approx. High: +5 V to +V DC, or open	Green LED (Lights up when the power is ON)	Green LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching)	-10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit	Enclosure: Heat-resistant ABS	Connector (Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (3-core) CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)	CN-EP1 (Connector for input device) (Note) : 1 pc. (Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less.	Net weight: 20 g approx. Gross weight: 40 g approx.
FX-CH2-P		FX-301(P) (Note) , FX-305(P) (Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side.	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	600 mW or less (when all indicators light up)	High: +4 V to +V DC Sink current 0.5 to 3 mA Input impedance 10 kOhm approx. Low: 0 to +0.6 V DC, or open	Green LED (Lights up when the power is ON)	Green LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching)	-10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit	Enclosure: Heat-resistant ABS	Connector (Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (3-core) CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)	CN-EP1 (Connector for input device) (Note) : 1 pc. (Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less.	Net weight: 20 g approx. Gross weight: 40 g approx.