Specification

Specifications table for model HG-T1110
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive, FDA regulations
Applicable ControllerHG-TC101 (-P), HG-TC111 (-P), HG-TC113
Position Detection Method CMOS-based
Installation distance0 to 500 mm 0 to 19.685 in
Measurement width10 mm 0.394 in
Light SourceRed semiconductor laser: Class 1 [IEC / JIS / GB / FDA (Note)]
Maximum output: 0.3 mW, Peak emission wavelength: 655 nm
(Note)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).
Repeatability1 μm 0.039 mil (Installation distance: 20 mm 0.787 in)
2.5 μm 0.098 mil (Installation distance: 100 mm 3.937 in)
5 μm 0.197 mil (Installation distance: 500 mm 19.685 in)
(Note)This is the P-P value of digital measurement value with half shading at the middle position of the installation distance.
Linearity±0.12 % F.S. (Installation distance: 20 mm 0.787 in)
±0.28 % F.S. (Installation distance: 100 mm 3.937 in)
(Note)Indicates an error with the ideal straight line of digital measured values.
Min. Sensing Objectø0.5 mm ø0.020 in (Installation distance: 500 mm 19.685 in)
(Note)When the light is blocked at the center position of 500 mm 19.685 in installation distance.
Temperature Characteristics ±0.03 % F.S./℃
(Note)When the light is half-blocked at the center position of 100 mm 3.937 in installation distance.
Operation Indicator Emitter : Laser radiation indicator (Green)
Receiver : Judgment output indicator (Orange / Green)
Pollution Degree 2
Operating Altitude2,000 m 6,561.68 ft or less
(Note)Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental Resistance: ProtectionIP67 (IEC) (Excluding connectors)
Environmental Resistance: Ambient Temperature-10 to +45 ℃ +14 to +113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental Resistance: Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental Resistance: Ambient IlluminanceIncandescent light: 5,000 â„“x or less at the light-receiving face
(Note)When the sampling cycle of the controller is set to "standard sampling".
Environmental Resistance: Insulation Resistance20 MΩ or higher, using 250 V DC megger (between all terminals and case)
Environmental Resistance: Vibration Resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental Resistance: Shock Resistance196 m/s2 acceleration in X, Y and Z directions three times each
Grounding MethodCapacitor grounding
MaterialCase: Die-cast aluminum, Light emitting and light receiving surfaces: Glass
Cable0.2 m 0.656 ft 4-core shielded cable with round connectors
Net Weight Emitter: 30 g approx., Receiver: 25 g approx.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date