Specifications
| Item | Performance characteristics |
|---|---|
| Connectable Sensor Head | Number of connectable units: Max. 2 units. |
| Supply Voltage | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Current Consumption | 500 mA approx. at 2 sensor heads connected 350 mA approx. at 1 sensor head connected (100 mA approx. is additionally required when the mini console is connected) |
| Sampling Rate | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| Analog Output : Voltage | Voltage output scale: -5 to +5 V/F.S (initial value) Output range during normal status: -10.0 to +10.0 V Output at abnormal status: -10.8 V or +10.8 V Resolution: 2 mV, Linearity: plus or minus 0.05 % F.S. Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx. (Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| Analog Output: Current | Current output scale: 4 to 20 mA/F.S (initial value) Output range during normal status: 2 to 24 mA Output at abnormal status: 1 mA or 25 mA Resolution: 3 micro A, Linearity plus or minus 0.05% F.S. Load impedance: 250 Ohm max., Response delay time: 10 micro s approx. (Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| Alarm Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less[between alarm output and Common(-)] - Residual voltage: 1 V or less(at 100 mA sink current) |
| Alarm Output : Output Operation | Opened when the amount of light is insufficient |
| Alarm Output : Short-Circuit Protection | Incorporated |
| Judgment Output (HI, GO, LO) | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less[between judgment output to Common(-)] - Residual voltage: 1 V or less(at 100 mA sink current) |
| Judgment Output (HI, GO, LO): Output Operation | Opened at output operation |
| Judgment Output (HI, GO, LO): Short-Circuit Protection | Incorporated |
| Strobe Output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less[between strobe output to Common(-)] - Residual voltage: 1 V or less(at 100 mA sink current) |
| Strobe Output: Output Operation | Opened at data determination |
| Strobe Output: Short-Circuit Protection | Incorporated |
| Remote Interlock Input | Laser emission is delayed when connected to Common (-). Laser emission stop at open Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Laser Control Input | Laser emission is stopped when connected to Common (-). Laser is emitted immediately after opened. Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Zero Set Input | Zero set is ON when connected with Common (-). Zero set turns to OFF after continuously connected to Common (-) for one second. Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| Timing Input | ON at/during connection to Common (-)(depending on analysis mode) Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Reset Input | Reset is done when connected to Common (-). Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Memory Change Input | Memory is specified when connected to Common (-). Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| Indicator: Power | Green LED (lights up at power on) |
| Indicator: Sensor Head A Laser Radiation | Green LED (lights up during or immediately before laser emission of sensor head A) |
| Indicator: Sensor Head B Laser Radiation | Green LED (lights up during or immediately before laser emission of sensor head B) |
| Indicator: Alarm 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| Indicator: Alarm 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| Environmental Resistance: Ambient Temperature | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Environmental Resistance: Ambient Humidity | 35 to 85 %RH |
| Environmental Resistance: Vibration Resistance | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| Environmental Resistance: Shock Resistance | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| Material | Case: Polycarbonate |
| Weight (Typ.) | 450 g approx. |
| Accessory | USB cable (2 m 6.562 ft long): 1 pc. Short bracket: 1 pc. |
Stock check
HL-C2C
What's New
