High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X

GP-X INDUCTIVE ANALOG SENSORS (CONTROLLER)

The inductive displacement transducers of the GP-X Series use eddy current techniques and are particularly noted for their highly accurate measurement at a resolution of 0.02% F.S. with minimal linearity error, a high sampling frequency of 40kHz and low temperature dependence.

GP-X Series Sensors are ideally suitable for the highly accurate motion and distance control of metal objects in harsh industrial environments.

Characteristics

High Sampling Frequency Of 40kHz
Resolution Of 0.02% F.S.
Minimal Linearity Error Max. ±0.3% F.S.
Minimal Temperature Dependence Max. ±0.07% F.S./°C
Bright, Two-Color LCD Display
Pre-Selectable Materials (Aluminum, Steel, Iron)
Four (4) Pre-Selectable Measurement Modes
Cross Talk Prevention Function
Offset Compensation And Scaling Functions
Synchronization Input And Alarm Output
Adjustable Limit Values With Transistor Outputs

Models table for series High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X
Part No.	Type	CE Marking Directive Compliance	Supply Voltage	Current Consumption	Resolution	Sampling Frequency	Linearity	Temperature Characteristics	Analog Voltage Outputs	Analog Voltage Outputs: Response Time	Comparative Outputs (HI, GO, LO)	Comparative Outputs (HI, GO, LO): Utilization Category	Comparative Outputs (HI, GO, LO): Output Number	Comparative Outputs (HI, GO, LO): Output Operation	Comparative Outputs (HI, GO, LO): Short-Circuit Protection	External Input	Serial I/O	Zero-Set Setting Method	Indicators: Mode	Indicators: HI	Indicators: GO	Indicators: LO	Indicators: Timing	Upper Level Digital Display Part	Lower Level Digital Display Part	Pollution Degree	Ambient Temperature	Ambient Humidity	Vibration Resistance	Shock Resistance	Material	Weight (Typ.)	Accessory	Sensing Range	Protection	Standard Sensing Object	Voltage Withstandability	Insulation Resistance	CK Resistance	Enclosure	Cable Protector	Sensing Part	Cable	Cable Extension	Accessories	Net Weight
GP-XC3SE	Non-threaded type For 0.8 mm 0.031 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1.6 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between +24 V and input), OFF voltage 4 V or less (between +24 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 0.8 mm 0 to 0.031 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	-	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC3SE-P	Non-threaded type For 0.8 mm 0.031 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 0.8 mm 0 to 0.031 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	-	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC22KL-P	Threaded type For 10 mm 0.394 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 10 mm 0 to 0.394 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	80 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC22KL	Threaded type For 10 mm 0.394 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1.6 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between +24 V and input), OFF voltage 4 V or less (between +24 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 10 mm 0 to 0.394 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	80 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X10M	Threaded type For 2 mm 0.079 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 2 mm 0 to 0.079 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	50 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X12ML	Threaded type For 5 mm 0.197 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 5 mm 0 to 0.197 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	45 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC12ML-P	Threaded type For 5 mm 0.197 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 5 mm 0 to 0.197 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	45 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC5SE-P	Non-threaded type For 1 mm 0.039 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 1 mm 0 to 0.039 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	PAR	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC8S-P	Non-threaded type For 2 mm 0.079 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 2 mm 0 to 0.079 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X5SE	Non-threaded type For 1 mm 0.039 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 1 mm 0 to 0.039 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	PAR	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.

Models table for series High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X
Part No.	Type	CE Marking Directive Compliance	Supply Voltage	Current Consumption	Resolution	Sampling Frequency	Linearity	Temperature Characteristics	Analog Voltage Outputs	Analog Voltage Outputs: Response Time	Comparative Outputs (HI, GO, LO)	Comparative Outputs (HI, GO, LO): Utilization Category	Comparative Outputs (HI, GO, LO): Output Number	Comparative Outputs (HI, GO, LO): Output Operation	Comparative Outputs (HI, GO, LO): Short-Circuit Protection	External Input	Serial I/O	Zero-Set Setting Method	Indicators: Mode	Indicators: HI	Indicators: GO	Indicators: LO	Indicators: Timing	Upper Level Digital Display Part	Lower Level Digital Display Part	Pollution Degree	Ambient Temperature	Ambient Humidity	Vibration Resistance	Shock Resistance	Material	Weight (Typ.)	Accessory	Sensing Range	Protection	Standard Sensing Object	Voltage Withstandability	Insulation Resistance	CK Resistance	Enclosure	Cable Protector	Sensing Part	Cable	Cable Extension	Accessories	Net Weight
GP-XC3SE	Non-threaded type For 0.8 mm 0.031 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1.6 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between +24 V and input), OFF voltage 4 V or less (between +24 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 0.8 mm 0 to 0.031 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	-	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC3SE-P	Non-threaded type For 0.8 mm 0.031 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 0.8 mm 0 to 0.031 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	-	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC22KL-P	Threaded type For 10 mm 0.394 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 10 mm 0 to 0.394 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	80 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC22KL	Threaded type For 10 mm 0.394 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1.6 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between +24 V and input), OFF voltage 4 V or less (between +24 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 10 mm 0 to 0.394 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	80 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X10M	Threaded type For 2 mm 0.079 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 2 mm 0 to 0.079 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	50 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X12ML	Threaded type For 5 mm 0.197 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 5 mm 0 to 0.197 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	45 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC12ML-P	Threaded type For 5 mm 0.197 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 5 mm 0 to 0.197 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Brass (Nickel plated)	PP	PA	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	Nut: 2 pcs. Toothed lock washer: 1 pc.	45 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC5SE-P	Non-threaded type For 1 mm 0.039 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.04 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 1 mm 0 to 0.039 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	PAR	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-XC8S-P	Non-threaded type For 2 mm 0.079 in sensing	EMC Directive, RoHS Directive	24 V DC plus or minus 10 % Ripple P-P 10 % or less	150 mA or less	0.02 % F.S. (64 times average processing) (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	40 kHz (25 micro s)	Within plus or minus 0.3 % F.S. (Note) This value was obtained at a constant +25 ℃ +77 ℉ .	0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.	Output voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2) (Note1： Adjusted to a 0 to +5 V factory setting.) (Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)	75 micro s (maximum speed)	PNP open-collector transistor -Maximum source current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and +V) -Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)	DC-12 or DC-13	HI / GO / LO 3 value output	HI: ON when measured value > the upper limit value GO: ON when upper limit value >= measured value >= lower limit value LO: ON when lower limit value > measured value	Incorporated	Photo-coupler input - Input current: 9 mA or less - Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input) - Input impedance: 5 kΩ approx.	RS-232C	Push button setting / External input setting	Orange LED (lights up when in mode status)	Orange LED (lights up when the upper limit value is exceeded)	Green LED (lights up when within the upper and lower limit value)	Orange LED (lights up when less than the lower limit value)	Green LED (lights up as per the external or internal trigger timing)	5 digit orange LED (display of numerical values out of upper and lower limit value)	5 digit green LED (display of numerical values within the upper and lower limit value)	3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each	Enclosure: Polycarbonate	Net weight: 120 g approx.	ATA4811 (Controller mounting frame): 1 set	0 to 2 mm 0 to 0.079 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	ABS	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
GP-X5SE	Non-threaded type For 1 mm 0.039 in sensing	EMC Directive, RoHS Directive						0.07 % F.S./℃ or less (Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.																		3 (Industrial environment)	-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each					0 to 1 mm 0 to 0.039 in (Note) The sensing range is specified for the standard sensing object.	IP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)	Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in	250 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions five times each	Stainless steel (SUS303)	PP	PAR	High frequency coaxial cable with connector, 3 m 9.843 ft long (Note) For the flexible cable type, please contact our office.	Extension up to total 10 m 32.808 ft is possible with the optional cable.	-	40 g approx. (Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.

What's New

Stay up to date

View All

HG-S Series Contact-Type Digital Displacement Sensor

Industrial Automation Icon

High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X

Part Number List

What's New

Stay up to date

HG-S Series Contact-Type Digital Displacement Sensor