Specification

Specifications table for model EX-L261-P-J
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range 20 to 50 mm 0.787 to 1.969 in
(Convergent point: 22 mm 0.866 in)
(Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.
Emission Spot Size (Typical)dia. 1mm 0.039 in
(at a sensing distance of 50 mm 1.969 in)
Sensing Object Opaque, translucent or transparent object
(Note)Make sure to confirm detection with an actual sensor before use.
Minimum Sensing Object (Typical)Gold wire of ø0.01 mm ø0.0004 in
(Note) Typical values when the sensitivity adjuster is optimally adjusted.
Hysteresis20 % or less of operation distance
RepeatabilityPerpendicular to sensing axis: 0.2 mm 0.0080 in or less
Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current Consumption15 mA or less
OutputPNP open-collector transistor
- Maximum source current: 50 mA
Output: Output Operation Light-ON / Dark-ON selectable by the output operation switching input
Output: Short-Circuit ProtectionIncorporated (short-circuit protection / inverse polarity protection)
Response Time0.5 ms or less
Sensitivity AdjusterContinuously variable adjuster
ProtectionIP67(IEC)
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient Humidity35 to 85%RH , Storage: 35 to 85%RH
Emitting ElementRed semiconductor laser Class 1 (IEC / JIS/ FDA/ GB)
(Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH
(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).)
(Maximum output: 1 mW, Peak emission wavelength: 655 nm 0.026 mil)
MaterialEnclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate
AccessoryMS-EXL2-3 (Mounting plate): 1 pc.

Stock Check