Digital Laser Sensor LS-400

The LS Series Digital Laser Sensor combines a highly focused, concentrated laser beam with a coaxial optical lens system to detect extremely small objects from long distances. This Series is particularly suitable for monitoring or detecting extremely small objects on a conveyor belt, for monitoring the sizes of objects and for monitoring edge positions in industrial production.

Characteristics:

  • Retroreflective: Coaxial Lenses With Polarized Filters
  • Reflective Types: Spot Type And Line Type
  • Red Light Laser Diode Laser Class 1 Or 2
  • Laser Focus And Line Adjustable
  • Ultra-compact Size

Part Number List

Results 27
Models table for series Digital Laser Sensor LS-400
Part No.DatasheetCE Marking Directive ComplianceApplicable AmplifiersSensing Range: U-LG ModeSensing Range: STD ModeSensing Range: Fast ModeSensing Range: H-SP ModeOperation Indicator Laser Emission IndicatorSpot-Shape AdjusterProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting Element: IEC/JIS/GB Standard Conforming TypeEmitting Element: FDA/IEC/JIS Standard Conforming TypeMaterialCableWeight (Typ.)AccessorySupply Voltage Current ConsumptionOutputs (Output 1, Output 2) Outputs (Output 1, Output 2): Output Operation Response TimeOutputs (Output 1, Output 2): Short-Circuit ProtectionExternal Input (Laser Emission Halt Full-Auto Teaching/Limit Teaching)Select Indicator Mode Indicator Digital DisplaySensitivity SettingFine Sensitivity Adjustment FunctionTimer Function Timer Function: Time Automatic Interference Prevention FunctionCable Extension
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.2 to 30 m 0.656 to 98.425 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 20 m 0.656 to 65.617 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
-
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached)
(Note) Cable cannot be extended.
Net weight: 30 g approx
Gross weight: 40 g approx
RF-230(Reflector): 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance with various standards.)
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
30 to 1,000 mm 1.181 to 39.370 in
30 to 500 mm 1.181 to 19.685 in
30 to 300 mm 1.181 to 11.811 in
30 to 300 mm 1.181 to 11.811 in
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
Multi-turn adjuster
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long
(Connector for amplifier attached)
(Note) Cable cannot be extended.
Net weight: 35 g approx
Gross weight: 45 g approx
LS-MR1 Lens attachment for line reflective: 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance)
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.2 to 30 m 0.656 to 98.425 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 20 m 0.656 to 65.617 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
-
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached)
(Note) Cable cannot be extended.
Net weight: 30 g approx
Gross weight: 40 g approx
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance with various standards.)
Orange LED (lights up when output 1 and output 2 are ON)
Green LED (lights up during laser emission)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Enclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
0.15 mm2 5-core cabtyre cable, 2 m 6.562 ft long
Net weight: 65 g approx
Gross weight: 75 g approx
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA (Note)
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less [at 100 mA (Note) source current]
(Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Selectable either Light-ON or Dark-ON, with jog switch
80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
Incorporated
PNP non-contact input
- Signal condition
High: +4 V to +V DC (sink current 3 mA or less), Low: 0 to +0.6 V DC or open
- Input impedance: 10 kOhm approx.
Yellow LED
(lights up when either output 1 or output 2 is selected)
RUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
4 digit (green) + 4 digit (red) LED display
Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings
Incorporated
Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
1 to 9,999 ms
Incorporated
[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)]
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Orange LED (lights up when output 1 and output 2 are ON)
Green LED (lights up during laser emission)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Enclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
0.15 mm2 5-core cabtyre cable, 2 m 6.562 ft long
Net weight: 65 g approx
Gross weight: 75 g approx
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
NPN open-collector transistor
- Maximum sink current: 100 mA (Note)
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current]
(Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Selectable either Light-ON or Dark-ON, with jog switch
80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
Incorporated
NPN non-contact input
- Signal condition
High: +5 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Yellow LED
(lights up when either output 1 or output 2 is selected)
RUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
4 digit (green) + 4 digit (red) LED display
Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings
Incorporated
Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
1 to 9,999 ms
Incorporated
[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)]
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Orange LED (lights up when output 1 and output 2 are ON)
Green LED (lights up during laser emission)
-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
Enclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
-
(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft)
Net weight: 15 g approx
Gross weight: 20 g approx
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
PNP open-collector transistor
- Maximum source current: 100 mA (Note)
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less [at 100 mA (Note) source current]
(Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Selectable either Light-ON or Dark-ON, with jog switch
80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
Incorporated
-
Yellow LED
(lights up when either output 1 or output 2 is selected)
RUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
4 digit (green) + 4 digit (red) LED display
Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings
Incorporated
Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
1 to 9,999 ms
Incorporated
[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)]
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.2 to 30 m 0.656 to 98.425 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 20 m 0.656 to 65.617 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.2 to 10 m 0.656 to 32.808 ft
(Note) The sensing range is the value for the RF-230 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.2 m 0.656 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
-
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached)
(Note) Cable cannot be extended.
Net weight: 30 g approx
Gross weight: 40 g approx
RF-230(Reflector): 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance with various standards.)
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.1 to 7 m 0.328 to 22.966 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 5 m 0.328 to 16.404 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 3 m 0.328 to 9.843 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 3 m 0.328 to 9.843 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
-
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 5 m 16.404 ft long (Connector for amplifier attached)
(Note) Cable cannot be extended.
RF-330(Reflector): 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance with various standards.)
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.1 to 5 m 0.328 to 16.404 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 3 m 0.328 to 9.843 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 1 m 0.328 to 3.281 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
0.1 to 1 m 0.328 to 3.281 ft
(Note) The sensing range is the value for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change the response time or incident light sensitivity.
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
-
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min.
between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 1 (FDA / IEC / JIS)
(Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached)
(Note) Cable cannot be extended.
Net weight: 30 g approx
Gross weight: 45 g approx
RF-330(Reflector): 1 pc.
Explanation label: 1 set
(Labels are written in Japanese and Chinese for compliance with various standards.)
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
30 to 1,000 mm 1.181 to 39.370 in
30 to 500 mm 1.181 to 19.685 in
30 to 300 mm 1.181 to 11.811 in
30 to 300 mm 1.181 to 11.811 in
Orange LED (lights up when the amplifier output is ON)
Green LED (lights up during laser emission)
Multi-turn adjuster
IP40 (IEC)
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
Enclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
0.1 mm2, single core two parallel shielded cables, 5 m 16.404 ft long
(Connector for amplifier attached)
(Note) Cable cannot be extended.
LS-MR1 Lens attachment for line reflective: 1 pc.
Warning label: 1 set
(Labels are written in Japanese, English and Chinese for compliance)