Specification

Specifications table for model LX-101
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range 10 ± 3 mm 0.394 ± 0.118 in
Spot Size1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply Voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current ConsumptionNormal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1 (OUT) NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 50 mA sink current)
Output 1: Short-Circuit Protection Incorporated
Output 1: Output Operation Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2 (OUT) NPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 50 mA sink current)
Output 2: Short-Circuit Protection Incorporated
Output 2: Output OperationInverted operation of the output 1
Response TimeMark mode: 45 micro s or less
Color mode: 150 micro s or less
Teaching Input NPN non-contact input
- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Digital Display4-digit red LED display
Sensitivity SettingMark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Fine Sensitivity Adjustment FunctionIncorporated
Timer Function Incorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
ProtectionIP67 (IEC)
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Emitting ElementCombined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
MaterialEnclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
Cable0.34 mm2 5-core cabtyre cable, 2 m 6.562 ft long
Cable ExtensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight (Typ.)Net weight: 120 g approx
Gross weight: 180 g approx
AccessoryM4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.