Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Output Operation | Dark-ON |
Sensing Range | 50 mm 1.969 in |
Min. Sensing Object | ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in) |
Repeatability (Perpendicular to Sensing Axis) | 0.02 mm 0.001 in or less |
Supply Voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
Current Consumption | Emitter: 10 mA or less Receiver: 10 mA or less |
Output | PNP open-collector transistor - Maximum source current: 20 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 20 mA source current) |
Output: Short-Circuit Protection | Incorporated |
Response Time | 0.5 ms or less |
Operation Indicator | Orange LED (Lights up when the sensing output is ON) |
Stability Indicator | Green LED (Lights up under the stable light received condition or the stable dark condition) |
Protection | IP67 (IEC) |
Ambient Temperature | -10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient Illuminance | Incandescent light: 5,000 ℓx at the light-receiving face |
Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation Resistance | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration Resistance | 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each |
Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each |
Emitting Element | Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) |
Grounding | Floating |
Material | Enclosure: PBT Lens: Polycarbonate Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
Cable | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long. |
Cable Extension | Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
Weight (Typ.) | Net weight (each emitter and receiver) : 15 g approx. Gross weight: 35 g approx. |
Accessory | M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length) |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉. |
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.