| | EMC Directive, RoHS Directive | 20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | - | Variable OFF-delay timer (0.1 to 1 sec. approx.) (Note) The timer is always effective. | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | Polyalylate | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 45 g approx Gross weight: 70 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | Continuously variable adjuster | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 40 mm 1.575 in) | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | Continuously variable adjuster | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 45 g approx Gross weight: 70 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 20 mm 0.787 in) | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | - | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 45 g approx Gross weight: 70 g approx | - |
| | EMC Directive, RoHS Directive | 20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | Continuously variable adjuster | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | Net weight: 45 g approx Gross weight: 70 g approx | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 40 mm 1.575 in) | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | Continuously variable adjuster | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | | Adjusting screwdriver: 1 pc. |
| | EMC Directive, RoHS Directive | 5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 20 mm 0.787 in) | 15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) (Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | - | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate (Note) : Old (For production before May 2021) …Polyalylate | 0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | | - |
| | EMC Directive, RoHS Directive | 20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in) with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in) | 10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) | 0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in) | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 35 mA or less | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Red LED (lights up when the output is ON) | Green LED (lights up under stable light received condition or stable dark condition) | - | Variable OFF-delay timer (0.1 to 1 sec. approx.) (Note) The timer is always effective. | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) | Polyalylate | 0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | | Adjusting screwdriver: 1 pc. |