Specifications table for model EX-FC1
ItemPerformance characteristics
Applicable ConnectorSL-CP1
Supply Voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current Consumption50 mA or less (for the unit itself), 135 mA or less (including the sensor input current when all outputs of sensors are ON)
OutputRelay contact 1a
- Switching capacity: 30 V 1 A DC (resistive load)
- Min. applied load: 10 mV 10 μA DC
- Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.)
- Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.)
Output: Output Operation The output relay is ON when the input signal from the sensor is ON
Note : Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly.
Response Time5 ms or less (excluding the response time of the sensor)
Input No.8 Nos.
Indicators: NormalGreen LED x 8 (light up when the sensor is connected to each channel and the connection setting switch is set to ON)
Indicators: ErrorRed LED x 8 (light up when the leak liquid is detected by a sensor connected to each channel or a sensor is mounted improperly)
Indicators: Output Orange LED (lights up when the output relay is ON (normal))
Ambient Temperature-10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
MaterialEnclosure: ABS, Unit mounting base: POM, Terminal part: PBT
Cable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
Cable ExtensionExtension up to total less than 10 m 32.808 ft is possible, with 0.3 mm2, or more, cable.
Weight (Typ.)Net weight: 85 g approx.
AccessorySL-CP1 (Snap male connector): 8 pcs., MS-SL-2 (Unit mounting base): 1 pc.

Stock Check


The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.