Specification

Specifications table for model SH-84R
ItemPerformance characteristics
Applicable AmplifiersSU-7 series
Sensing Range 17 to 23 mm 0.669 to 0.906 in (Convergent point: 20 mm 0.787 in) (Spot size: 1 x 4 mm 0.039 x 0.157 in)
Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
Sensing Object Min. 0.07 mm 0.003 in width black line on white paper (Note 1)
(with 20 mm 0.787 in setting distance and at the optimum sensitivity)(Note 2)
Note 1 : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.

Note 2 : The minimum sensing object for SH-84R is specified for the case when the sensor detects a black line with respect to the spot as shown below.
Hysteresis10 % or less of operation distance
Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.
Repeatability (Perpendicular to Sensing Axis) 0.03 mm 0.001 in or less
Note : The repeatability for SH-84R is specified for the case when the sensing object approaches the spot sideways as shown below (0.12 mm 0.005 in if it approaches from above or below).
Operation Indicator Red LED (lights up when the sensing output of the amplifier is ON)
Protection-
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,500 lx or less at the light-receiving face
Vibration Resistance10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementRed LED (modulated)
Emitting Element: Peak Emission Wavelength680 nm 0.027 mil
MaterialEnclosure: Polycarbonate, Lens: Acrylic
Cable0.089 mm2 single core, two parallel shielded cables, 2 m 6.562 ft long
Cable ExtensionExtension up to total 5 m 16.404 ft is possible with an equivalent cable.
Weight (Typ.)20 g approx.
Accessory-
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date