Specifications
| Item | Performance characteristics |
|---|---|
| Sensing Object | Water, Fluorinert™ Note:Highly viscous liquid may not be detected stably. Note:Fluorinert is the world wide trademark of 3M. |
| Supply Voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current Consumption | 10 mA or less(PNP output type: 15 mA or less) |
| Output | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Output: Output Operation | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 50 ms or less |
| Fault Indicator | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Normal Indicator | Green LED (lights up when the sensor is mounted properly) |
| Protection | IP67 (IEC) |
| Ambient Temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉ Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Emitting Element | Infrared LED (non-modulated) |
| Material | Enclosure: Polypropylene |
| Cable | 0.1 mm2 3-core PVC cabtyre cable, 2 m 6.562 ft long |
| Cable Extension | Extension up to total 50 m |
| Weight (Typ.) | Net weight: 25 g approx. |
| Accessory | MS-EX-F7-1(SUS mounting bracket): 1 pc. Note : The mounting bracket for EX-F71(-PN) is not interchangeable with that of EX-F72(-PN) due to the different sensitivity settings of each sensor. |
Stock check
EX-F71
What's New
