2D Code Reader LP-ABR10

Code Reading, together with Laser Marking, is widely used to enhance production management and traceability. This is possible because the Code Readers from Panasonic are able to read 2D codes marked directly on products.

Now users can combine a Panasonic Laser Marker with the new sensitive 2D Code Reader LP-ABR10 for higher-quality management.

Models table for series 2D Code Reader LP-ABR10
Part No.	Datasheet	CE Marking Directive Compliance	Image Sensor	Effective Pixels	Internal Illumination Source	Reading Angle	Supply Voltage	Power Consumption	Interface: Ethernet	Interface: RS-232C	Digital Input	Digital Output	Protection	Ambient Temperature	Ambient Humidity	Vibration Resistance	Weight (Typ.)	Supported Symbols (2D)	Minimum Resolution	Read Center Distance	View Area (Horizontal × Vertical)	G Distance (Typical)
LP-ABR11		EMC Directive, RoHS Directive	1/3 inches CMOS monochrome	1,280 × 960 (1.2 million pixels approx.)	White LED	PITCH : ±35°, SKEW : ±35°, TILT : 360°	24 V DC ±10 %	Command (SYNC) standby : 140 mA approx., During reading operation : 400 mA approx.	10Base-T, 100Base-T, 1000Base-T	1,200 bps to 115.2 kbps	Photo-coupler isolation × 1 (Input resistance : 1 kΩ, OFF voltage : 0 to 0.8 V, ON voltage : 6 to 28 V)	Photo-coupler isolation × 4 (Maximum rating : 30 V DC, 50 mA)	IP65(IEC)	0 to +40 ℃ +32 to +104 ℉, Storage : -20 to +65 ℃ -4 to +149 ℉	35 to 85 % RH (No dew condensation allowed), Storage : 35 to 85 % RH (No dew condensation allowed)	10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each	Net weight : 200 g approx.	Data Matrix (ECC200), QR Code	0.167 mm 0.007 in	100 mm 3.937 in	54 × 40 mm 2.126 × 1.575 in (at read center distance)	- For cell size of 0.167 mm 0.007 in : 85 to 125 mm 3.346 to 4.921 in - For cell size of 0.25 mm 0.010 in : 70 to 150 mm 2.756 to 5.906 in
LP-ABR12		EMC Directive, RoHS Directive	1/3 inches CMOS monochrome	1,280 × 960 (1.2 million pixels approx.)	White LED	PITCH : ±35°, SKEW : ±35°, TILT : 360°	24 V DC ±10 %	Command (SYNC) standby : 140 mA approx., During reading operation : 400 mA approx.	10Base-T, 100Base-T, 1000Base-T	1,200 bps to 115.2 kbps	Photo-coupler isolation × 1 (Input resistance : 1 kΩ, OFF voltage : 0 to 0.8 V, ON voltage : 6 to 28 V)	Photo-coupler isolation × 4 (Maximum rating : 30 V DC, 50 mA)	IP65(IEC)	0 to +40 ℃ +32 to +104 ℉, Storage : -20 to +65 ℃ -4 to +149 ℉	35 to 85 % RH (No dew condensation allowed), Storage : 35 to 85 % RH (No dew condensation allowed)	10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each	Net weight : 200 g approx.	Data Matrix (ECC200), QR Code	0.167 mm 0.007 in	200 mm 7.874 in	44 × 33 mm 1.732 × 1.299 in (at read center distance)	- For cell size of 0.167 mm 0.007 in : 185 to 220 mm 7.283 to 8.661in - For cell size of 0.25 mm 0.010 in : 175 to 230 mm 6.89 to 9.055 in - For cell size of 0.167 mm 0.007 in : 190 to 215 mm 7.48 to 8.465 in - For cell size of 0.25 mm 0.010 in : 180 to 225 mm 7.087 to 8.858 in

Models table for series 2D Code Reader LP-ABR10
Part No.	Datasheet	CE Marking Directive Compliance	Image Sensor	Effective Pixels	Internal Illumination Source	Reading Angle	Supply Voltage	Power Consumption	Interface: Ethernet	Interface: RS-232C	Digital Input	Digital Output	Protection	Ambient Temperature	Ambient Humidity	Vibration Resistance	Weight (Typ.)	Supported Symbols (2D)	Minimum Resolution	Read Center Distance	View Area (Horizontal × Vertical)	G Distance (Typical)
LP-ABR11		EMC Directive, RoHS Directive	1/3 inches CMOS monochrome	1,280 × 960 (1.2 million pixels approx.)	White LED	PITCH : ±35°, SKEW : ±35°, TILT : 360°	24 V DC ±10 %	Command (SYNC) standby : 140 mA approx., During reading operation : 400 mA approx.	10Base-T, 100Base-T, 1000Base-T	1,200 bps to 115.2 kbps	Photo-coupler isolation × 1 (Input resistance : 1 kΩ, OFF voltage : 0 to 0.8 V, ON voltage : 6 to 28 V)	Photo-coupler isolation × 4 (Maximum rating : 30 V DC, 50 mA)	IP65(IEC)	0 to +40 ℃ +32 to +104 ℉, Storage : -20 to +65 ℃ -4 to +149 ℉	35 to 85 % RH (No dew condensation allowed), Storage : 35 to 85 % RH (No dew condensation allowed)	10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each	Net weight : 200 g approx.	Data Matrix (ECC200), QR Code	0.167 mm 0.007 in	100 mm 3.937 in	54 × 40 mm 2.126 × 1.575 in (at read center distance)	- For cell size of 0.167 mm 0.007 in : 85 to 125 mm 3.346 to 4.921 in - For cell size of 0.25 mm 0.010 in : 70 to 150 mm 2.756 to 5.906 in
LP-ABR12		EMC Directive, RoHS Directive	1/3 inches CMOS monochrome	1,280 × 960 (1.2 million pixels approx.)	White LED	PITCH : ±35°, SKEW : ±35°, TILT : 360°	24 V DC ±10 %	Command (SYNC) standby : 140 mA approx., During reading operation : 400 mA approx.	10Base-T, 100Base-T, 1000Base-T	1,200 bps to 115.2 kbps	Photo-coupler isolation × 1 (Input resistance : 1 kΩ, OFF voltage : 0 to 0.8 V, ON voltage : 6 to 28 V)	Photo-coupler isolation × 4 (Maximum rating : 30 V DC, 50 mA)	IP65(IEC)	0 to +40 ℃ +32 to +104 ℉, Storage : -20 to +65 ℃ -4 to +149 ℉	35 to 85 % RH (No dew condensation allowed), Storage : 35 to 85 % RH (No dew condensation allowed)	10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each	Net weight : 200 g approx.	Data Matrix (ECC200), QR Code	0.167 mm 0.007 in	200 mm 7.874 in	44 × 33 mm 1.732 × 1.299 in (at read center distance)	- For cell size of 0.167 mm 0.007 in : 185 to 220 mm 7.283 to 8.661in - For cell size of 0.25 mm 0.010 in : 175 to 230 mm 6.89 to 9.055 in - For cell size of 0.167 mm 0.007 in : 190 to 215 mm 7.48 to 8.465 in - For cell size of 0.25 mm 0.010 in : 180 to 225 mm 7.087 to 8.858 in

2D Code Reader LP-ABR10

Part Number List