Specification

Specifications table for model SF2B-A16-P
ItemPerformance characteristics
Beam Pitch40 mm 1.575 in
No. of Beam Channels16
Protective Height 632 mm 24.882 in
Current ConsumptionEmitter: 40 mA or less
Receiver: 60 mA or less
PFH<sub>D</sub>6.48 × 10-9
MTTF<sub>D</sub>100 years or more
Weight (Total Of Emitter And Receiver)830 g approx.
Applicable Standards: International StandardIEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1)
Applicable Standards: JapanJIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1)
Applicable Standards: North AmericaUL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06
(Note) Not compatible when using the bottom cap cable SF2B-CB05-A.
Applicable Standards: Europe (EU)EN 61496-1 (Type 2), EN 55011
CE Marking Directive ComplianceMachinery Directive, EMC Directive, RoHS Directive
Operating Range0.2 to 13 m 0.656 to 42.651 ft (0.2 to 5 m 0.656 to 16.404 ft when using the SF2B-CB05-B adapter cable)
Min. Sensing Objectø47 mm ø1.850 in opaque object
Effective Aperture Angleplus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
Power Voltage 24 V DC plus or minus 15 % Ripple P-P 10 % or less
Control Outputs (OSSD 1, OSSD 2)PNP open-collector transistor
- Max. source current: 200 mA
- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]
- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m 100.066 ft length cable)
Control Outputs (OSSD1, OSSD2): Protection CircuitIncorporated
Control Outputs (OSSD 1, OSSD 2): Operation ModeON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal)
Auxiliary Output (Aux)PNP open-collector transistor
- Max. source current: 60 mA
- Applied voltage: same as supply voltage [between the auxiliary output and +V]
- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m 100.066 ft length cable)
(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used.
Response TimeOFF response: 15 ms or less
ON response: 40 to 60 ms
Auxiliary Output (Aux): Operation ModeWhen using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFF
When using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted
Auxiliary Output (Aux): Protection CircuitIncorporated
Interference Prevention FunctionIncorporated
- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)
SF2B-Hx and SF2B-Ax can be used together. (Note 2)
[When using SF2B-CB05-B (optical synchronization):
- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)
- Parallel connection: 2 sets max.
- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.
SF2B-Hx and SF2B-Ax can be used together. (Note 2)]
(Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.
(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.
(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes.
Synchronization Method Cable synchronization (optical synchronization when using SF2B-CB05-B)
Emission Halt FunctionIncorporated
External Device Monitoring FunctionIncorporated
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃ -13 to +158 ℉
Ambient Humidity30 to 85 % RH, Storage: 30 to 95 % RH
Environmental Resistance: Degree of ProtectionIP65 (IEC) (*IP67 is later than Ver.2)
Environmental Resistance: Dielectric Strength Voltage1,000 V AC for one min. between all supply terminals connected together and enclosure
Ambient IlluminanceIncandescent light: 3,500 lx or less at the light-receiving face
Insulation Resistance20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting ElementInfrared LED (Peak emission wavelength: 870 nm 0.034 mil)
Cable ExtensionExtension up to total 30.5 m 100.066 ft is possible for both emitter and receiver, with optional mating cables.
Connecting MethodConnector
MaterialEnclosure: Aluminium
Upper and lower edges : Die-cast zine alloy
Inner case: Polycarbonate / Polyester resin
Cap: PBT

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.