Optical Touch Switch SW-100

The SW-100 Optical Touch Switch is an ergonomically designed start-up Switch that is activated simply by touching it for greater convenience and less stress on the hands.

Optical Touch Switch SW-100

Part number list

Results 2

Models table for series Optical Touch Switch SW-100
Part No.	Datasheet	CE Marking Directive Compliance	Sensing Method	Applicable Standards	Power Voltage	Current Consumption	Outputs	Output: Output Operation	Output: Short-Circuit Protection	Response Time	Time-Out Function	External Input	Indicators: Power Indicator	Indicators: Operation Indicator (OPE.)	Indicators: External Input Indicator 1	Indicators: External Input Indicator 2	Indicators: Fault Indicator (Fault)	Environmental Resistance: Degree of Protection	Ambient Humidity	Ambient Temperature	Ambient Illuminance	Environmental Resistance: Voltage Withstandability	Vibration Resistance	Insulation Resistance	Shock Resistance	Removable-Type Terminals: Connector	Removable-Type Terminals: Terminal Part	Material	Maximum Cable Length	Weight (Typ.)
SW-101		EMC Directive, RoHS Directive	Thru-beam type photoelectric sensor (2 beam axes)	CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	100 mA or less (excluding external connection load)	Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current)	Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF	Incorporated	100 ms or less when an object is detected 50 ms or less when an object is not detected	Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)	0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off)	Green LED (lights up when the power is ON)	Green LED (lights up when an object is detected)	Green LED (lights up when external input 1 is valid)	Orange LED (lights up when external input 2 is valid)	Yellow LED (blinks or lights up when fault occurs)	IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)	30 to 85 % RH, Storage: 30 to 85 % RH	-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	Incandescent light: 3,000 Lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	3.5 mm 0.138 in pitch, 2-level socket: 12 pins	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)	Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber	Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm² ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm² )	Net weight: 130 g approx. Gross weight: 200 g approx.
SW-111		EMC Directive, RoHS Directive	Thru-beam type photoelectric sensor (2 beam axes)	CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	100 mA or less (excluding external connection load)	Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current)	Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF	Incorporated	100 ms or less when an object is detected 50 ms or less when an object is not detected	Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)	0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off)	Green LED (lights up when the power is ON)	Green LED (lights up when an object is detected)	Green LED (lights up when external input 1 is valid)	Orange LED (lights up when external input 2 is valid)	Yellow LED (blinks or lights up when fault occurs)	IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)	30 to 85 % RH, Storage: 30 to 85 % RH	-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	Incandescent light: 3,000 Lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	3.5 mm 0.138 in pitch, 2-level socket: 12 pins	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)	Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber	Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm² ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm² )	Net weight: 150 g approx. Gross weight: 220 g approx.

Models table for series Optical Touch Switch SW-100
Part No.	Datasheet	CE Marking Directive Compliance	Sensing Method	Applicable Standards	Power Voltage	Current Consumption	Outputs	Output: Output Operation	Output: Short-Circuit Protection	Response Time	Time-Out Function	External Input	Indicators: Power Indicator	Indicators: Operation Indicator (OPE.)	Indicators: External Input Indicator 1	Indicators: External Input Indicator 2	Indicators: Fault Indicator (Fault)	Environmental Resistance: Degree of Protection	Ambient Humidity	Ambient Temperature	Ambient Illuminance	Environmental Resistance: Voltage Withstandability	Vibration Resistance	Insulation Resistance	Shock Resistance	Removable-Type Terminals: Connector	Removable-Type Terminals: Terminal Part	Material	Maximum Cable Length	Weight (Typ.)
SW-101		EMC Directive, RoHS Directive	Thru-beam type photoelectric sensor (2 beam axes)	CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	100 mA or less (excluding external connection load)	Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current)	Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF	Incorporated	100 ms or less when an object is detected 50 ms or less when an object is not detected	Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)	0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off)	Green LED (lights up when the power is ON)	Green LED (lights up when an object is detected)	Green LED (lights up when external input 1 is valid)	Orange LED (lights up when external input 2 is valid)	Yellow LED (blinks or lights up when fault occurs)	IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)	30 to 85 % RH, Storage: 30 to 85 % RH	-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	Incandescent light: 3,000 Lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	3.5 mm 0.138 in pitch, 2-level socket: 12 pins	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)	Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber	Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm² ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm² )	Net weight: 130 g approx. Gross weight: 200 g approx.
SW-111		EMC Directive, RoHS Directive	Thru-beam type photoelectric sensor (2 beam axes)	CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less	100 mA or less (excluding external connection load)	Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current)	Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF	Incorporated	100 ms or less when an object is detected 50 ms or less when an object is not detected	Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)	0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off)	Green LED (lights up when the power is ON)	Green LED (lights up when an object is detected)	Green LED (lights up when external input 1 is valid)	Orange LED (lights up when external input 2 is valid)	Yellow LED (blinks or lights up when fault occurs)	IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)	30 to 85 % RH, Storage: 30 to 85 % RH	-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉	Incandescent light: 3,000 Lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	3.5 mm 0.138 in pitch, 2-level socket: 12 pins	3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)	Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber	Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm² ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm² )	Net weight: 150 g approx. Gross weight: 220 g approx.

I/O Circuit and Wiring diagrams